Your cart is empty.
Your cart is empty.The ICM2807 is a low cost fit, form and functional replacement for the Carrier HK42FZ017 furnace control boards.
Greg
Reviewed in the United States on January 14, 2025
Thanks again to the supplier for their support with this purchase. This replacement which we substituted for a different card has worked well.
Customer
Reviewed in the United States on October 4, 2024
Pretty easy to install but the instruction sucks. Video that you scan the barcode to install the new software is way too fast to understand! I ended up searched for video on youtube to have it done!
Sarah Blomberg
Reviewed in the United States on January 11, 2024
Our furnace was broke for a few months during brutal Chicago weather. Got this thing in quick, hubby installed it in a few minutes and heat was back working in no time!
Steve G
Reviewed in the United States on July 29, 2023
The new control board arrived on time and in the nick of time. It was getting hot! I had a HVAC guy come out to diagnose the problem: $110.. He said it needed a new control board. Cost $1100 installed. Bought this one from Amazon for about $185. I took pictures of the old board before starting to install the new one. Took my time to install it wire for wire. Powered up the system and it worked! We have cool air! Total cost less than $300 including the HVAC guy. Bye the way the HVAC guy tried to up sell me for a total of $12K! If you're handy this is the way to. go.
shaun martel
Reviewed in Canada on May 15, 2023
The shipping took way too long,had to reorder, board seems to be good,and I was told the components are of a better grade.
Customer
Reviewed in the United States on December 13, 2022
I put this in to replace a blown relay on a 2003 Carrier 58CTA090-16 and it worked perfectly. Installation was a snap, the defaults on the blower timeout and such were the same as that from old board, and the wires colors and the schematics matched my furnace--and the old board--exactly. It took a day or two too many to get here, but Carrier wanted $600+ for their board. I wasn't in a crunch, so all good.A small update. I did have some problems with the furnace with the new card. It's likely just because the card is really good, and now quite a bit more sensitive to sensors. So far it seems to be 100% the furnace, not the card. Still, I used the tech support email, and they didn't seem to know the product that well.
M. Lampers
Reviewed in the United States on February 10, 2021
Okay, I don't usually leave reviews right away, but this item worked perfectly and saved our cold bacon at a price point we could afford. If it were to crap out suddenly, I'll come back and update, but right now I am positively thrilled with this control board. An HVAC guy I used to trust wanted upwards of $1250 to come out and install a new control board (he also wanted $180 just to sell me a hot surface igniter, which I wanted to replace before moving on to the control board, so I no longer trust that guy). So I started looking for a Carrier 58TUA080-10014 control board HK42FZ017. That board was selling for $500-600 most places. I found one at $450, but didn't know the online supplier.Then I found out this board replaced my board. It's identical to the HK42FZ017, and it was simple to install after watching a single YT video and reading the instructions included with this board. Just make sure and label everything (and take pictures before you start), and you should have no trouble. Make sure and run the test after install by jumping the two spots with a piece of insulated wire. It'll alert you to any other issues.Anyhoodles, it started immediately, and it's run perfectly ever since. It's been four days now, so again that's kind of early to be giving five stars. But after being at my wit's end, I'm appreciative of this board and its price. I spent a week constantly restarting my furnace multiple times a day while I searched for an affordable option. This was that option.
Lufade
Reviewed in the United States on April 23, 2020
Worked perfectly for my Bryant 80T furnace! Great replacement board at a fraction of the cost of the original part! Box has instructions printed on the interior. Comes with stickers for wiring diagram, status codes, etc. Hardest part of the replacement was disconnecting the old board. This one went in with ease. It's also worth noting that, until my furnace died a week ago, I knew nothing about furnaces. I found a solid source of information online, learned all I could, did the troubleshooting, and decided to replace the board. Finding this part at this price was incredible.
Edgar
Reviewed in the United States on March 4, 2018
Purchased because of flood damage. Paid for quick shipping and came in on time. Install was simple and took a total of about 30 minutes. Everything plugged in perfectly from the old board to the new one. After i installed I did get a code 34 and 14. All i had to do was clean the flame sensor with tissue paper and everything fired up perfectly. Excellent product especially like that it came with a new wire harness as well. New sticker labels to put on the furnace was also great. This board is much cheeper than the original, so all around I am very happy. I would advise anyone who is going to do this to take one wire off at a time and attach it to the new board as you go, take your time and remember to turn on the gas and flip on the furnace switch once installed.
Recommended Products
$139.14
$ 65 .99 $65.99