Your cart is empty.
Your cart is empty.James Gaskets exhaust mounting kits are perfect for installing a new exhaust on your motorcycle. Each kit contains the correct exhaust gaskets, nuts, and retaining rings for installing an exhaust or simply freshening up your motorcycle. Available with heavy-duty flange nuts or chrome plated acorn nuts, these kits offer different style exhaust gaskets for a variety of applications.
Michael J.
Reviewed in the United States on February 23, 2021
I used these when installing new exhaust pipes on my 2015 Street Glide Special. I had no issues installing these and had no leaks.
Anthony Persampieri
Reviewed in the United States on October 12, 2021
Nice kit with fit & quality part's fast shipping with fair price .
Vince L.
Reviewed in the United States on December 22, 2020
This has the retaining ring, gaskets, and the improved nuts with a larger flange. This is the cone shaped thick gasket and they do seal well. Install carefully or use the tool to press them in. A good pack to have on hand.
Camiemom
Reviewed in the United States on April 16, 2020
Since the Harley dealers are closed right now, I had to order these online. I really wanted the Screamin' Eagle style, but decided to try these. They look like very good quality. I do own the proper installation tool, so hopefully these will seal properly on my 2005 FLSTFI with Vance and Hines Long Shots. I will update after the bike is running, again.
Ben W.
Reviewed in the United States on June 27, 2018
Excellent product! The additional hardware is a nice bonus. Do yourself a favor and don't reuse the old junk. I installed these on my 2015 Street Glide Special with a set of Vance and Hines Big Radius 2 into 2. Perfect fit and no leaks.
Geof
Reviewed in the United States on June 22, 2018
works great as advertised
CumminsD
Reviewed in the United States on December 8, 2018
Great quality with everything I needed included in the kit. I put them in the freezer for a few hours and used a little lube around the edges and they slid right into place with no problems.
M D.
Reviewed in the United States on January 17, 2018
My review is about the use of the tapered fiber gasket (or woven SS, whatever your pleasure) opposed to the copper ring gasket and does not reflect on the manufacture nor the seller here. These gaskets seal extremely well and are a perfect choice if every ounce of performance is not your concern. If you have spent countless hours and $$$ to gain every minuscule of HP you can squeeze out, USE THE COPPER RING GASKET if at all possible. Here's why...this fiber gasket like any other gasket requires the proper tightening torque and procedure to produce "crush" and seal properly and typically causing the gasket to "squeeze-out" past the seat and protrude into your exhaust port passage causing turbulence and restricting some flow. This will affect everything down to your tune. Not saying this happens in every circumstance... I've seen where one of the heads is good and the other is restricted or both heads are restricted, and some where they were ok but usually had some exhaust ticking because they were not tight enough. I like these gaskets and routinely use them where the maximum gains are not of importance.In the examples you see the concern...pic 1 and 2 are the tapered outward side and pic 3 is the back side that faces the port interior where it clearly shows the amount of gasket that has squeezed into the path of flow. Also note the carbon build-up that also occurs.
Recommended Products
$22.98
$ 10 .99 $10.99