Your cart is empty.
Your cart is empty.KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
faslayne
Reviewed in the United States on May 1, 2023
no issue on install, i didnt like the cheap nuts that came with them so i reused my robust OEM ones.
Luis
Reviewed in Mexico on March 11, 2022
Viene en una caja de kyb pero la pieza no dice kyb por ningun lado
marc cymbalista
Reviewed in Canada on October 5, 2020
Great
Ricardo Lopez
Reviewed in the United States on February 4, 2019
According to KYB suggestions I bought front mount plate SM5215. for corolla 2009 front struts and SM5763,SB102,SB132. Everything fit Ok except for the SM5215 there is a diference between the center of the mount and strut of 1-1.4 mm and that create a lot of noise.
Bubba Shope
Reviewed in the United States on February 22, 2016
Solid construction, but not NSK bearings.
Naitsirk-
Reviewed in the United States on January 28, 2015
I got one of these and it had a clunk and apparently defective bearing, Probably a fluke. KYB is a good brand.
AJ HS
Reviewed in the United States on March 21, 2014
These look like OEM except they do not have the little foam dust/noise shield strips of foam on the top. I did note that the bearing was from a very good bearing manufacturer, NSK. Went on with no issues.
Fan!
Reviewed in the United States on October 9, 2014
Fits & works. ONLY difference between this KYB vs the Toyota OEM front strut mount, that was being replaced, were the three supplied top mounting nuts. OEM Toyota was 12mm nuts. KYB was 1/2inch (13mm) nuts. I just reused the Toyota nuts. This aside, I'm sure this strut mount will work and should not give me any issues.
Customer
Reviewed in the United States on August 25, 2013
Why would anyone post a picture of the boot with the mount when all that is included is the mount? This is intentionally deceptive.
Customer
Reviewed in the United States on April 14, 2012
Fit perfectly with aftermarket coilover strut. Does not include bellows shown in pic. But I read description and knew that before I ordered. Arrived quickly after order.
Recommended Products
