Your cart is empty.
Your cart is empty.The Lock TN Load BK-103 Standard Wheel Chock is our answer to an economical motorcycle transport system. The BK-103 can be used with any motorcycle or quad. The unique V shaped design means one size fits all. The chock is removable via it Us innovative quick release plate, or it can be installed permanently. Powder coated solid steel construction insures strength. Ratchet straps (not included) are necessary for safe motorcycle transport. The BK-103 is not a stand alone wheel chock. J System includes: Standard wheel chock, quick release plate, and all necessary hardware.
Amanda
Reviewed in the United States on July 14, 2024
Bike still needs added support of straps on either side to hold it up. If your bike leans any it will bend the lock n load system. Easy to install and makes it easy to load bike.
Madi Hilmershausen
Reviewed in the United States on May 5, 2024
It was too narrow for my Kawasaki KLR650 and when loading it for the first time the side of the bracket was tight against my brake rotor and I scratched the paint on the device and my rotor had some orange paint on it but does not appear damaged....I got lucky since I didn't watch when driving into the cradle....so measure first. Had to take a floor jack and widen it so now I have a half inch clearance. I am not a fan of how the cradle attaches to the base. It slides into groves and I worry about those bolts coming loose and sliding out. If you tightly strap over the tire to the base with the nice strap that's included it will probably be safe. I think they designed it this way so you can easily remove the top part and leave the base set...so that is nice. The product is more solid and the hardware more beefier than appears in the photo. It feels fairly priced.....but a little lower would be good.
T Fergusson
Reviewed in the United States on May 28, 2024
Perfect solution for a 11hr road trip!! 100% recommend. Perfect for a 16ft tandem trailer, with some space to spare on the back. The quick disconnect is nice and seems to work well. No problems with the install and the provided strap works fine.
Terry McCracken
Reviewed in the United States on November 1, 2024
This is just an expensive wheel chock. The only thing these do is hold the front wheel until you can strap the bike from the bars. The lock and load WILL NOT SUPPORT A BIKE FROM THE FRONT WHEEL ONLY, as shown in the photos. I put 2 of these in an enclosed trailer and both bikes were nearly laying on the floor when I arrived at my destination. The lock and load bent beyond what I thought possible. Very cheaply made with crap metal that has no strength. DO NOT BUY! I was going to return mine but because of a family emergency, I missed my return window so now I guess I will give mine to somebody I don't like...at least I will have the satisfaction of knowing they are dealing with this junk product, instead of me!Another great idea that was poorly executed and made with the cheapest metal available!!!!
Michel Verret
Reviewed in Canada on May 26, 2023
Ce support de moto est parfait pour ma moto enduro semi route semi trail 300 CRF de HondaPour une meilleure stabilité je vous propose d’acheter les cales en surplus pour mettre sur le côté du support sinon la roue sera lousse
Timothy B. Baldwin
Reviewed in the United States on December 26, 2023
Installation was somewhat difficult when you have to slide the black part onto the orange part and those two bolts.Otherwise worked as intended. Transported a '23 EC300 GasGas 2 hours on the highway w/o issue.After getting back I checked and the bolts were still tight on it.
Michael
Reviewed in the United States on October 28, 2023
Looks awesome and holds dirt bikes securely. For the extra money it is worth it. The included ratchet straps are heavy duty.The other day had the bikes mounted and when driving one of my other generic/off the shelf brand straps gave way. These wheel chokes held the bikes securely to the trailer, and saved my bikes from falling over/off my flatbed trailer . Yes the bikes were swaying a bit, but they weren’t able to go anywhere. Lock n load 100% saved the day with the ruggedness of their products.
2Hyper
Reviewed in the United States on May 21, 2020
I have a Suzuki DRZ400S, I originally tried the Harbor Freight motorcycle chock and while it worked I felt it was too wide for MX tires an returned it. This costs double but fits the MX wheel much better so I figured I would try it.PROS:1) Easy to mount to the trailer, actually has the same 4 bolt pattern as the HF Wheel Chock2) The Orange wheel holder piece can be taken off if needed with 2 easy bolts...great for extra room on the trailer when not hauling the bike3) The wheel strap connects easily and holds the wheel in placeCON:1) Bike still needs added support of straps on either side to hold it up. NO WAY I would trust this as a total solution like they suggest. If you paired this up with those clamps (Bike BInderz or such) that hold the bike by the foot pegs you have a quick rock solid system. Or just straps in the rear left/right side)For a hundred it's not bad and comes with everything you need to mount it thru 2" (1.5" actual) thick trailer decking. Looks nice too!
Dman Canada
Reviewed in Canada on October 4, 2020
Easy to use. Just load your bike into cradle and it locks your wheel in place. When loading a bike by yourself this sure if a nice feature to help rather than trying to hold bike up and getting the straps on. This way lets the bike stand free and sturdy to allow you to move onto other tasks to secure it down.
Collin
Reviewed in Canada on October 30, 2020
Awesome for wanting something removable to allow you to use your trailer for other stuff. Needed something thats easily removable to be able to haul quads as well. Its extremely beefy and sturdy. Easy to remove as well. Extremely happy and will be buying another one or two in the near future. Obviously would not trust leaving the bike as is in the chock and still strap it down side to side.
DP
Reviewed in Canada on April 29, 2020
Does not hold the dirt bike sturdy.
J. Alex
Reviewed in the United States on July 10, 2019
This thing works like a dream. For my DRZ, I had to get the 4 little plastic blocks they sell and put two of them on one side of the rotating brace part. This was to give it better grip on my wheels, otherwise the bike swayed back & forth enough that I didn't like it. Great idea. Simple. Econimical. Not cheap chinese junk. For example, note their use of proper grammar in the description. :)
Recommended Products
