Shopping Cart

Your cart is empty.

Your cart is empty.

Megan Front Upper Tower Brace Strut Bar (Steel/Aluminum Polish)(MR-SB-LI06FU-1P)

Free shipping on orders over $29.99

$89.69

$ 35 .99 $35.99

In Stock
  • Placement: Front; Upper
  • Enhances Steering Response and Stability; Tower Mounts (Brackets) are Made of Reinforced Steel for Extra Strength and Durability
  • One-Piece Race Spec Strut Tower Bar constructed of strong Aluminum to extremely tight tolerances and then polished to perfection. Increases Stiffness and Reduces Body Rolling during Corning
  • Compatible / Replacement For 2006-2012, 2013-2020 GS-Series (S190 3rd, L10 4th Gen; For 2006-2012 GS350 Base For 2013-2020 GS350 F Sport; 2006-2013, 2014-Present IS-Series (XE20 2nd, XE30 3rd Gen; For 2008-2014 IS F For 2006-2015 IS250 V6 & RWD ONLY; For 2016-2024 IS300 V6 & RWD ONLY; For 2006-2024 IS350 V6 & RWD ONLY; For 2022-2024 IS500; 2015-Present RC-Series (XC10 1st Gen);For 2015-2017 RC200t;For 2015-2024 RC300;For 2015-2024 RC350;
  • Remark: IS-F Model: The side Engine Room Cover has to be removed or trimmed to complete the installation Does NOT Fit Convertible; For 4-Cylinder Turbo Models, Please use Part Number: MR-SB-LI16TFU-1P; Installation Note: Require to remove OEM Strut Tower Plate on each side to complete the installation


Strut Bar. One-Piece Race Spec Strut Tower Bar constructed of strong Aluminum to extremely tight tolerances and then polished to perfection. This bar ties the chassis from left to right at critical stress points (Between the shock/strut towers) to decrease body roll. As you drive and maneuver, your car undergoes many different forces that the chassis of the car absorbs; the brace helps to absorb the energy and directs these forces into your suspension components so that they can better do their job and serve their purpose more effectively. A must for any track-driven, and a great addition to any street or show car, this bar truly lives up to the Megan Racing name.


Joshua
Reviewed in the United States on January 3, 2025
Now normally it wouldn't fit the gs350 but the mounting points on the ends are removable an you can flip them around an then have to do slight modification to make them fit nothing too difficult would give a 5 star if I didn't have to modify anything
Emmanuel Jerez
Reviewed in the United States on November 3, 2024
The media could not be loaded.
Bryan
Reviewed in the United States on October 6, 2024
After emailing the company (Megan), and being assured in writing it would fit my car (2009 GS350 awd) - it was miles off. I asked them for help to sort it out - got an initial polite reply - and then radio silence.I have $100 worth of junk on my hands and no help whatsoever. Be warned - it’s a crapshoot if it fits, even if they say it does. If it does not fit - they do not care. Welcome to Megan Racing.
J. Huynh
Reviewed in the United States on February 26, 2023
This is obviously designed for IS models but appearantly reversing the brackets 180 degree will also fit GS strut bolt pattern. However, the bar will angle upwards vs downwards follow the slop of the hood. If you get over that slight visual annoyance then it does the job for $90. Some trimming of the L/R plastic panels required foe the bar to sit flush.
Mohamad
Reviewed in the United States on January 19, 2023
Basically I got this for ecstatic. I don't track my car or drive aggressively, with that said under normal driving conditions I can feel the handling is a little tighter. Could be placebo effect, anyways looks great.
United States
Reviewed in the United States on June 1, 2022
no more body roll, better handling totally worth it
Richard Spencer jr
Reviewed in the United States on December 9, 2022
Looks nice; and I can feel the difference slightly. I'm going to get one for the rear to get the full effect. Easy to install. I highly recommend it!!!
Ru Das
Reviewed in the United States on February 4, 2021
Bought this for one of my best friends, and he loves the handling now in his car