Your cart is empty.
Your cart is empty. Product Name: Mini Dual Band Wifi IPEX/U.FL Antenna；
Frequency Range ：2.4GHz 5.8GHz;
Compatible 2G 3G GSM Terminal Frequency; connector : U.FL/IPEX
V.S.W.R ：≤2 Gain : 3dBi
Polarization : Vertical Radiation : Omni directional
Power : 50W
Impendence :50 ohm
Package Included: 2*mini wifi IPEX Antenna
Paul A Pongratz
Reviewed in the United States on March 6, 2025
I've got a cheapo set of Wifi mesh routers that have their antennas printed on a piece of PCB material - luckily there are IPEX connectors, so I was able to plug these two antennas onto the IPEX receptacles - and eliminate the poor quality, low gain antennas that the manufacturer passed off as being 'functional'I placed these antennas on my main node - all that's needed to mount these is to drill a .280 diameter hole and pass the mini coaxial cable & IPEX connector through. Easy to do!Using these antennas, I now have a -60db signal, whereas before I installed them, the signal strength was -89db to -97db...barely enough to communicate with the other two nodes OR my devices!Yes, I will be purchasing 2 additional pair of these nice little antennas to upgrade the other 2 nodes - a very inexpensive fix for a very critical design flaw.The connectors are definitely just as shown on the photo provided for this product. They fit, they work amazingly well and look pretty good too.These would also be great on cheap Wifi surveillance cameras or Wifi booster/repeaters - as many of them do not even have antennas connected to the circuit board (fake antennas)Two thumbs up - a great rescue for my off brand Wifi equipment!
James D.
Reviewed in the United States on March 27, 2025
The gain seems about right, I don't have a VNA. Tested on 2.4 and 5GHz works as expected. Connectors are as good as any I suppose, these tiny things are fragile but I managed to not break them. The housing over the element is solid enough and stays put when you pivot them.
Bob
Reviewed in the United States on January 19, 2025
Bought this for use in a mini-pc that was missing an antenna module, it was in no way designed for this unit, and I probably should have checked the measurements before ordering.The mounting holes and connector points were too larger for my m.2 style wifi card,(designed for the larger style mount points older wifi cards use (see pic 3) but that's not the product's fault.But I was able to make it work anyway, it's by no means perfect. but I get MUCH better reception now than I did with no antenna's attached, (wifi card is mounted under the hdd tray)The only mild complaint I could levy is that the mounting holes did not have their measurements listed at time of writing, and the antenna do not have rotation points on their base, just only foldable.But they still work great, even for 5ghz wifi!
Recommended Products
