Your cart is empty.
Your cart is empty.Product Description
An Aggressive Meat-hook
The meathook design of these handlebars helps maintain the factory look of your motorcycle, enhancing its appearance.
Removable lid
We made this open lide to help wire, you can put the shield into the bar when finishing the wiring.
Diamond-Knurled Areas
The diamond-knurled areas make the installation more stable and not slide easily.
Support TBW Application
Our product engineers pre-cut the bar end for TBW applications. Making them a must-have accessory for any Harley owner.
Mike S.
Reviewed in the United States on March 10, 2025
I'm in the middle of refreshing my old Street Glide, especially since it was laid over and now a few parts need to be replaced. Luckily the engine/crash bars did their job and took the bulk of the damage, along with the bags. My old handlebars were slightly bent, so I needed new bars. Previously I had a set of the big brand 16" meat hook style bars which were excellent, thought a bit too high with my hands over my shoulders. I dropped down to 12" bars and decided to try these instead of the big brand replacements, and I'm very pleased. First thing I noticed is that the weld quality of these are NOT as good as the big brand ones I took off. I attached photos showing a comparison, first photo is of the old bars, expensive but perfect quality welds and perfect finishing. Second photo are these bars, not quite as refined, but for 1/3 the price they're good enough. The chrome finish looks excellent too, time will tell but I'm confident these will hold up and last a long time. One REALLY nice unexpected treat was finding that these came with cable pulls already installed! From the controls all the way down to the center, they're pre-threaded with these little wires with loops on the end, making the chore of pulling cables much easier! I was fearing a tough job, but learned about wire lube... I've heard of folks using dish soap or lotion, but I didn't want any residue or anything incompatible with plastic or rubber. Not wanting to spend another $20 on some specialty electrician wire pulling lubricant, I found some 'personal' water-based lubricant cheap and used that and wow it was easy to pull the new cables through, even with the tough bends. The cutouts are deburred so nothing will get caught. The bend of the bars is adequate; it isn't perfect for me but I can live with it. There's a bit more pullback and downward sweep than what I'd like, but again for 1/3 the price it's good enough. I don't have time to sit and try 20 pairs of bars looking for that perfect fit, instead I'll make these work. I'd have rated five stars if the welds were perfect, but I'm still very happy and have no intention of changing them out as they're still excellent bars especially for the price.
Marc
Reviewed in Canada on September 29, 2024
Just put these on and so far I'm impressed.Comfortable and very adjustable.I did have a bit of trouble passing the wires through the bars but with a little patients it all worked out.I went from 10 inch factory mini apes to these bad boys so I did have to purchase 4 inch wire extensions plus the upper clutch cable to make it work.After adjusting the brake line connection on the block,the line was long enough that I didn't need to change the brake line.Packaging was well done and very fast delivery.All in all very happy with this purchase.
Eric
Reviewed in Canada on June 4, 2024
Qualité prix ok parfait pour le prix
Ronaldo James Davison padrino
Reviewed in the United States on February 26, 2024
Very happy with this purchase, look nice…. Need modifications for the accelerator for a Yamaha v star 650, other than that 100% happy
Emilly Pineda
Reviewed in the United States on December 17, 2024
El artículo de buena calidad, pero enviaron el tamaño equivocado, pedí de 12 pulgadas y enviaron de 14", ahora queda muy alto para mi cliente. No puedo regresarla porque desde Panamá sale muy caro la devolución.
Scott
Reviewed in Canada on April 23, 2024
Nice looking bars but the measurements are incorrect so I had to return. They were too tall.
Colby Drain
Reviewed in the United States on September 21, 2023
Just got them in today. Box was fine but the bars as you can see are damaged. Like someone tried mounting them to their bike, used it, and returned it. Rock chips on the paint, grinding and scuff marks on the handles and clamps. Wtf? Someone really looked at this before packaging it and said, “yep that looks fine let’s ship it” crrrazy.
Luke Ward
Reviewed in the United States on March 8, 2023
Super easy to get the wires through, took about 20 minutes.The hardest part of the install was getting the rubber caps off the end of the bars .
Jason Lucas
Reviewed in the United States on March 26, 2023
One of the round chrome plugs fell out. Not strong at all. I would like it replaced
Tack man
Reviewed in the United States on August 30, 2022
Installed on 2004 harley davidson road king fit very well, look awesome, and feel amazing. A big upgrade from the beach bars that were installed when I purchased the bike. Feels like a totally different bike now.
Bradley
Reviewed in the United States on April 22, 2022
These bars went on my 2011 street bob Dyna to replace my 16” bars. As you can tell they aren’t 14”. I went to put my old handle grips on just for looks while my new ones come in and I found it to be tight on the throttle side not the clutch side..I will be giving an update with video after the throttle comes in.
Recommended Products
$154.75
$ 71 .99 $71.99