Shopping Cart

Your cart is empty.

Your cart is empty.

MOOG EV800457 Steering Tie Rod End for Ford F-150

Free shipping on orders over $29.99

$23.95

$ 10 .99 $10.99

In Stock

About this item

  • COMPATIBILITY – Fits 2007-2014 Ford Expedition; 2009-2014 Ford F-150; 2007-2014 Lincoln Navigator.
  • GET THE RIGHT PART -- Before purchasing, please check the “Amazon Confirmed Fit” bar to ensure this part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes. If the “Amazon Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase
  • ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
  • TIME SAVINGS -- Pre-applied thread locking compound makes installation easier and prevents self-loosening


Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.


cesar
Reviewed in the United States on September 26, 2024
The steering feels as new.
Anonymous buyer
Reviewed in the United States on June 7, 2024
Moog, as always good quality, easy install. Mine did not ship with the little tube of grease as shown but otherwise good quality parts. Fast shipping.
JustAguy
Reviewed in the United States on March 5, 2024
I replaced the inner and outer tie rods at the same time (used a Dorman outer tie rod) because my outer would not unscrew. I would reccomend doing this so you can pull the inner/outer tie rods out as a single peice. I then used a cut off wheel and cut the inner tie rod shaft so I could easily remove the boot to reuse. Then get an alignment afterwards and you'll be set for another 100k miles if you're lucky.I will say though, I found it difficult to get any grease into this ball socket. It is tight and it seems no matter how much I worked the socket while pushing grease into it, it still felt like metal on metal. I made sure it was all covered with plenty of grease before installing the boot again. If anything, it will keep water out.
Djin Aquino
Reviewed in Canada on November 5, 2024
Received the package before the delivery date, complete and correct item already installed to my truck durable and sturdy
Jim
Reviewed in the United States on August 22, 2023
Arrived on time and I saved about $300 from what the shop quoted me.
Igor P.
Reviewed in the United States on March 22, 2023
Very good replacement for the original. It fit perfectly on my 2008 Eddie Bauer Expedition. I've been riding it for several months and so far it works perfectly
Brandon Schwindt
Reviewed in the United States on February 16, 2022
Would have rated better as a product if they would have supplied replacement dust boots.
jmac5585
Reviewed in the United States on September 17, 2019
Product was great and installed easily on my 2007 Ford expedition EL. The only issue I had was that my inner tie rod tool was not deep enough to fit over the knuckle. My local parts store lent me one which was not deep enough either(I would assume that this would be for any brand). I ended up using a large adjustable wrench and it work just fine.
Mitch
Reviewed in Canada on February 15, 2019
Had them in for a MONTH. One side has already gone bad. And they rusted completely already. Terribly unimpressed. Go buy parts from a parts store. Might cost more but at least they'll WARRANTY their products.
c claud
Reviewed in the United States on January 29, 2012
You can't go wrong with Moog parts as they are the best replacement parts you can get for your car. I have been using Moog parts for many years with very good results. Yes they cost more than the cheap o parts, but you get what you pay for in the long run. I replaced all four tie rod ends with Moog parts and then had an alignment. The result? Like new steering straight down the road. Nice smooth turns with no play in the steering at all.You will have to give the outer tie rod ends a shot of grease at every oil change for long tie rod end life, but no big deal, just get a cheap grease gun and give them a shot or two.Very happy with this purchase.
Recommended Products

$22.96

$ 10 .99 $10.99

4.5
Select Option