Your cart is empty.
Your cart is empty. Module features:
1. High power, high efficiency, 5A, low ripple;
2. Three-in-one: used as a common step-down module with overcurrent protection; used as a charger for various voltage lithium batteries, batteries, nickel-cadmium nickel-hydrogen batteries (batteries), for solar panels, wind power generation Machine and other occasions; used as a high-power LED constant current drive module;
3. There are two modes of constant voltage and constant current, and there are indicators to indicate which mode the module is currently in;
4. When used as a lithium battery charger, you can set the float voltage and charge current, and the indicator light indicates whether it is charging or is full;
5. With current limiting protection, the module will not burn out even if the output is short circuited.
Module parameter
Input voltage: DC 5V - 36V.
Output voltage: DC 1.25V - 32V continuously adjustable.
Output current: adjustable, 5A (recommended for use within 4.5A).
Output power: 75W (recommended to use within 50W, please reduce power when using large differential pressure).
Working temperature: -40~+85 °C.
Working frequency: 180KHz.
Conversion efficiency: 96%.
Short circuit protection: Yes (limit current 8A).
Over temperature protection: Yes (automatically turn off the output after over temperature).
Input reverse connection protection: None, (If necessary, please input a large current diode in the input string).
Installation method: 4 pieces of 3mm twisted wire.
Wiring method: terminal block or soldering terminal, V-IN is input, V-OUT is output.
Module size: length 68.2mm width 38.8mm height 15mm.
Weight: 35g.
Note: When using this module for more than 3A, 35W, please strengthen the heat! ! !
Package Included
1Pcs NOYITO DC-DC 5A 75W Buck Power Supply Module
Big Al
Reviewed in the United States on February 16, 2023
Mine are very accurate and easy to set. Project was to make a lead-acid battery charger and the result was just fine.
D. Sroelov
Reviewed in the United States on August 20, 2020
it seems to do exactly what it is supposed to do. i built a little battery charger out of it, and everything appears to be working. adjusting the voltage and current is easy, and after that, everything works. the only thing you need to watch is the cooling. if you run this thing at high current, you need to make sure it stays cool. i've been running it at 14V @ 2A to charge small UPS and alarm batteries, and it barely gets warm.
Jeddy
Reviewed in the United States on March 23, 2020
It works flawlessly, perfect as described. No issues at all
S. Schroeder
Reviewed in the United States on January 19, 2020
Works as expected outdoors in a sealed box.
Recommended Products
