Your cart is empty.
Your cart is empty.
Description:
◆ The HHO generator is made of high-quality iron and 304 stainless steel with a gold-plating process, high strength and heat resistance.
◆ 300W high power, stable currents, flame temperatures up to 5070℉, a 34 fl oz water addition, and a large gas production of 3.35 cu ft/h.
◆ The electrolysis tank of this welder adopts series-parallel composite technology, with high electrolysis efficiency and low power consumption.
◆ High-definition and accurate ammeter, pressure meter, and water volume viewing window can display the status of each index of the machine.
◆ Built-in pressure switch, when the set voltage is exceeded, over-pressure protection will be activated to protect you and the machine.
Specifications:
◆ Model: H180
◆ Color: Blue
◆ Shape: Rectangular
◆ Material: Iron, 304 Stainless Steel
◆ Surface Treatment: Gold-plating
◆ Power Source: Corded Electric
◆ Plug Standard: US Standard
◆ Voltage: AC 110V 1.5A
◆ Power: 300W
◆ Max. Gas Production: 95 l/h = 3.35 cu ft/h
◆ Flame Temperature: 2800℃/5070℉
◆ Electrolysis Tank: 1
◆ Inlet Cell: 0
◆ Water Consumption: 30 ml/h = 1 fl oz/h
◆ Maximum Water Adding: 1 liter = 34 fl oz
◆ Solution Density: 30%
◆ Pressure Range: 0.13-0.15 Mpa
◆ Working Pressure:
◆ Max. Water Consumption for Gas Production: 0.3 liter = 10 fl oz
◆ Electrolysis Tank Capacity: 1.5 liter = 50 fl oz
◆ Mount Type: Tabletop
◆ Assembly Required: Yes
◆ Pipe Length: 4.9 ft
◆ Power Cord Length: 4.9 ft
◆ Product Size: 19'' x 11'' x 14''
◆ Package size: 20'' x 12'' x 16''
◆ Shipping weight: 16 lbs
Package Includes:
◆ 1 x Acrylic Polishing Machine
◆ 1 x Power Cord
◆ 1 x Flame Gun
◆ 1 x PVC Tube
◆ 3 x Flame Nozzles
WW in Texas
Reviewed in the United States on February 6, 2025
I've now purchased 8 of these H180 units and have them spliced together to produce a Brown's Gas generator for healing. The setup provides enough gas volume to breathe exclusively pure Brown's Gas for hours at a time. Each unit has been flawless for this purpose and each has been tested as a torch unit before being added to the group unit.
Juanita Williams
Reviewed in the United States on May 6, 2024
Hubby is a welder by trade thought it would be something he could use for creative hobby ideas, but not practical for home garage use! Disappointed for sure, but maybe eventually…
Donald R. Simmons
Reviewed in the United States on December 10, 2024
Temature is Rather low - I could NOT get it to be hot enough to solder brass cartridge case near primer
Robert Elliott
Reviewed in the United States on May 19, 2023
I bought this for jewelry making. It will not replace my oxy/propane or my acetylene torch, but it definitely has a place in my shop. It will work with my 'little torch' and just about all the tips that are available for that. It is not powerful enough to cast ingots. I use it mainly for annealing with a multi orifice tip I bought. There's a serious learning curve to this thing because you can't adjust the oxy/hydrogen ratio. All you can do is adjust the volume of gas and the tip size. If the volume is low and the tip too big the tip will actually melt because combustion occurs inside the tip. If you want to pay 10--20 times as much for one sold by a jewelry company they have all the volume and tip sizes figured out for you. At any rate, this is a very well made machine and I expect I'll find more use for it as I go along...
JFK
Reviewed in the United States on December 27, 2022
You get what you pay for and this is a sturdy, easy to operate and safe HHO torch. My main complaint is the owner’s manual is thin on details and not very well written.
Sigrid
Reviewed in the United States on November 3, 2022
I LOVE this little HHO generator / flame welder. I use it for silversmithing and goldsmithing. Absolutely exceeds the economics and versatility of traditional pressurized tank systems once it is fully set up with the necessary accessories (i.e. with methanol and boric acid in the bubbler, and a proper jeweler's torch with flashback arrestor installed). Very serviceable design as well!
Greg
Reviewed in the United States on November 24, 2022
The flame is so small, like the size of a match. The machine cannot keep up and produce enough gas to keep the torch blowing hot. Yes I tried everything to increase the gas production. I even purchased a better torch in hopes this machine would become useful. Not to mention the product I received had clearly been used. It's had a few scuffs and was still wet inside. First thing I did when I got it was run my finger along the water fill port and wiped out rust before even getting the machine out of the box. The video is misleading atleast compared to the 160h model. I will be returning this item sadly as I assume the last person did with the model I received. Just stick with a propane torch trust me you couldn't even use this thing to solder two wires together. Very unsatisfied that I also received something that had clearly been used before.
Johan H. Loots
Reviewed in the United States on October 6, 2022
Very easy to use
Recommended Products
