Your cart is empty.
Your cart is empty.Product Description
BIAJIYA PLASTIC WELDER
Are you still fretting about repairing your broken plastic products? Welcome to choose our plastic welding kit with adjustable temperature function. It can help you to solve it! Our products are designed and crafted with the utmost care and attention to details and quality, ensuring meet customer's needs.
Package Include:
- 1 x Plastic Welder
- 20 x Black Plastic Rods and 20 x White Plastic Rods
- 3 x Solid Copper Tips
- 1 x Scrub Sponge
- 1 x Metal Brush
- 1 x Metal Stand
- 2 x Stainless Steel Mesh
- 1 x Instruction
Plastic Welder Repair Kit
Product Feature:
The distance between the tip and the handle is short enough to be handled easily; Just like drawing with a pen.
This has 200-480 °C (392-895°F) adjustable temperature. This wide range of applications enables much diversified efficiency and usage.
Use the black and white plastic rods to repair car bumper, dashboard, kayak, canoe, fuel tank, plastic furniture, kids Riding Toys, and so on
- Maximum Power 60W
- Temperature Adjustment Range 200-480℃（342-892℉）
- Cable Length 150 cm/59 inch
- Pyrography pen weight 100g
- Temperature error ±10℃
Notice：
1. Please do not touch the metal parts with your hands while in use.
2.Please do not wet the plastic welder pen or use it when your hands are wet.
3. Please do not place the metal part of the pyrography pen directly on to the work platform. Remember to remove the power plug and place it on the stand when not being used.
4. Please turn off the power and wait for the head to cool down before replacing the tip.
Widely Application
It can help you fix and reinforce broken and cracks in most of the plastic in daily life, such as repair car bumper, dashboards, headlight fittings, motorcycles, dashboards, fenders, kayak, boats, lamp holders, garbage bins or other plastic parts！
Plastic Welding Kit-Enjoy repairing plastic parts and save money
The more you repair. The more you will find items to repair
Mauricio
Reviewed in the United States on January 10, 2025
Excellent 👍
bowcoastie
Reviewed in the United States on April 21, 2025
Arrived and was missing the temperature control knob. I tried it anyway to see if it would work as I had a job to do. I would not heat past 171 C; far to low for any plastic. In the end I just used my soldering iron and will order a new tip for it.
John Cleghon
Reviewed in the United States on April 1, 2025
work great
Richard
Reviewed in the United States on January 3, 2024
The welder even in the maximum temperature setting does not melt plastic. If the mesh is used, the heat is spread and getting worse. It said 80W which is pretty big as a welder but the measurement by power meter in its highest power setting and maximum power consumption is just 33W, showed in the photo.The same power of 80W plastic welder from Harbor Freight tool has twice of diameter of heating parts as this one and works like charm. This as 33w is just a junk but cheating as 80W.Such small body can only have 33w but no way to have 80W, determined by physical law.I raised the rating from 1 star to 4 stars. Before I through it away, I tried another time. It works well although it is 33w. I doubt the first time the power dial happened to sit in lower temperature accidentally? But I have no way to verify. Or the head was not tight enough as the other buyer said or it just need burn in? Anyway it works well over two projects later.
Jeff
Reviewed in the United States on January 26, 2024
I used this to repair a broken housing on a vacuum cleaner. I had two failures before I figured out how important surface preparation is. The housing had a shiny hard coating that had to be completely removed with a Dremel tool before the melted plastic would stick properly. My only complaint is that I would prefer that the tool got hotter; it takes more time than I would like to melt the plastic.
Customer
Reviewed in Canada on September 28, 2023
Used to repair a cracked bumper and end result is more than satisfactory.
Dinusha Suriyage
Reviewed in Canada on August 19, 2023
Some items were missing including brush and one plate. But I was able to do my welding.
Freddy Stefanich
Reviewed in Canada on July 9, 2023
No
Cowraizer
Reviewed in the United States on July 8, 2023
Does not withstand ANY pressure used this twice and wasn't applying much pressure at all and it snapped
Jonathan
Reviewed in Canada on July 7, 2023
Second day using it, it broke off right at the top plastic part that holds the heating element inside. Little bit of pressure and it snapped like a twig.
Tom Ashe
Reviewed in Canada on June 9, 2023
higher power would have been better takes a long time to heat up.
synt1zen
Reviewed in the United States on September 3, 2022
Wrap a sheet of aluminum foil on the thread will bring the heat to the head much much faster! You will see this limped 30w welder improved from a rated 60w kit up to an 80w kit.
Stefan Tucholski
Reviewed in the United States on August 20, 2022
You get what you pay for, unless you order this, then you get 1, not 3, copper tip, that spins freely after 1 minute of use. The threads are fine, but where the threaded post connects to the flat end, it spins.
Recommended Products