Your cart is empty.
Your cart is empty.Product Description
Dominator Cycles is a manufacturer of premium quality and distinctly styled motorcycle parts and accessories. All of our products are designed and made in the USA and our five-star customer support, customized products, and limited lifetime coverage will make Dominator a partner you and your bike can partner with for years to come.
All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment.
All of our parts are hand-made in the USA employing a multi-step manufacturing process using the finest materials. We pride ourselves on being a manufacturer of premium quality and distinctly styled motorcycle parts and accessories.
- Lifetime Coverage against manufacturer defects
- All bars are Fully TIG Welded
- Beveled & De-Burred
Superior Quality
There have been many copycat attempts to replicate our products but many customers over the years have come back because of our superior quality.
We also pride ourselves in our smooth and clean arched corners whereas competitors often use straight sharp edges which are easier to manufacture but fall short of the premium styling distinguishing riders’ demand.
- Carefully designed to provide natural, relaxed grip angles
- Optimal pullback comfort
- Direct bolt-on replacements for stock equipment
- Hassle-free installation of bar tubes
Dominator works on the principle belief that riders want the best of the best with no compromises. Ride comfort and easy installation make choosing Dominator Industries handlebars to customize your bike a no-brainer.
All in 1 Handlebar Kits!
Dominator Industries has partnered with Cable Kits Brand to create a one-stop handlebar kit solution. These kits are strictly comprised of components manufactured in the United States. It’s everything you’ll need to complete a quality bar install.
The Original Pre-Wired
What is it worth to have your project be as simple and easy as possible? We feel it’s worth everything so we’ve gone ahead and done all of the hard work for you. Our bars are prewired with your switch wiring and set up with the ability to pull your existing twist grip sensor in literally under 10 minutes!
Saves Money
We all know what the dealer charges to switch out and wire your bars, or any experienced tech! We’re extremely confident that we can save you hundreds of dollars! Who doesn’t wanna save money!?
Remove the Headache
Those of us who have swapped our bars know, beyond a shadow of a doubt, that wiring new bars can be a daunting task. Because of this, we set out to fix that and provide you with solutions that virtually eliminates the headache.
For many bikers riding a motorcycle is not a hobby or need, it’s Passion.
We get that. The sheer enjoyment of being on a motorcycle with the open air with the wind brushing through your face, the sound of the engine and the vibration you feel. It’s an embracement of the senses and what we try to convey into every Dominator product.
Amy Y
Reviewed in the United States on October 14, 2024
Poor fit and finish VERY HARDTo wires due to rough edges inside Bar Using a Camera to look inside the bars. There shows a lot of welding defects. Sad they look nice on the outsideKeep Looking for a better Bar
Bill H.
Reviewed in the United States on September 30, 2023
First let me say the bars look great. This is not my first set of bars to install and I’ve successfully wired several sets in the past. I have not had experience with meathooks so i decided to order prewired to save some time and a few curse words. Second wiring the TBW following Dominators instructions worked great installed in less than 10 minutes. Installed the bars hooked up the wires and no power to the head unit and power to controls. Started trouble shooting and found the left side wires shorting and a couple wires dead. Pulled the bars back off and decided to pull the left side wires sure enough wires are cut (see photos). Instead of sending the bars back, remember I just installed the TBW, I attempted to contact Dominator to see if they would replace the wire harness. Tried website, tried to call left message sent web portal message tried social media and no response. So I went ahead and installed the factory wires and reinstalled the bars. Worked fine for about 100 miles then security light came and and threw code. Researched code which came back to security system. Searched frantically for possible grounding issue, cut or pinched wires and no luck. Finally decided to check right side wire harness. Guess what another shorted wire to the on off switch. I know know I should have checked both sides once I found the left side issue but I did not. Maybe I just got a bad set but know that Dominator is NOT going to be there if you have an issue. BTW I rewired the right side after a few cuss words reinstalled the bars and all works fine. So much for buying prewired bars. I’ll never do business with Dominator again.
Doug
Reviewed in Canada on March 6, 2023
Dennis Doyle
Reviewed in the United States on March 20, 2023
Nicely made bars, tried to run my internal wires and kept getting caught on burrs on the inside of the bars. Other than that, bars seemed to have good quality. Return was simple.
dan
Reviewed in the United States on September 24, 2022
These guys are friggen awesome! Helpful and stand up people
Uncle Booger
Reviewed in the United States on June 18, 2022
Not compatible with current HD "throttle by wire" twist grip application. The inside of the bar's right side is burred up and won't allow insertion of the twist grip cylinder.Don't waste your time and money.
Keith cairns
Reviewed in the United States on May 4, 2022
Straightforward install.
D.Y.
Reviewed in the United States on November 22, 2022
Pre wired is great! I accidentally ordered the wrong bars, mainly from not reading the description fully. Messaged them and got quick reply’s, very friendly and helpful. Shipping was on point as well!The bars fit just as described. Great product. I wish it came with the fly by wire but other than that I’m happy with the purchase.
Papa
Reviewed in the United States on January 14, 2022
Wiring had a short which damaged my bike. Has a crack in the bars. Once notified the company refused to even talk to me to find a resolution.
Recommended Products
$268.96
$ 99 .00 $99.00