Your cart is empty.
Your cart is empty.Product Description
- They are made of Aluminum Alloy Material,strong and durable for long time service.
- Adjustable screw for fit Different thickness of glass,which Suitable for the Max 12mm(0.47 Inch)thick glass.
- Installed on your bathroom,kitchen and office to hold the glass board,glass shelf.
- The Shelf Glass Clip does not need to be drilled or nailed, and the glass is fixed by adjusting the screw.
- Good fixing function, no need to worry about the loosening and sliding of the glass.
- Used for home or office glass laminate, glass partition, glass shelf, glass cabinet, and so on.
- Suitable for 8-12mm（0.31-0.47inch） Thickness glass cabinet cupboard,adjustable.
Tim Bernicky
Reviewed in the United States on August 25, 2023
Product description was a lie
Ching lau
Reviewed in the United States on April 8, 2022
The media could not be loaded.
Don Quixote
Reviewed in the United States on June 8, 2021
I bought these brackets to make my own DIY fire pit glass shield. I did this for two reasons - purchased glass shields are way too expensive (would cost me ~$200-$250 for what I would need) and I have non-standard fire pit which made finding an appropriate commercial item very difficult and even more expensive. So, after some research I bought four pieces of glass 2 each, 20" and 40" by 6", ¼" thick tempered glass (total cost: $49, including high CA sales tax) and these brackets.The Good:1) Very good price compared with all the alternatives (about $3.50/each including tax)2) Aluminum - so it will not rust due to elements and should last a long timeThe Not-So-Good (here I don't mean 'Bad', just not so good):1) It's made for 8-10 mm glass and I only used ¼" glass. I wish they made a version for ¼" glass. But since I knew this going in, I ended up using clear silicone cabinet bumpers ( Amazon: https://smile.amazon.com/dp/B07NM1P2F6/ref=cm_sw_em_r_mt_dp_D8SG2XS47DHHM1FNTWBZ?_encoding=UTF8&psc=1 ). The screws have similar silicone at the tips so the glass isn't damaged, so this provided protection on both sides of the glass2) This is a wish list item: I think they should provide a little 'lip' at one end of the bracket so the glass can sit against it. This would make placement of the glass much more uniform and repeatable.In the photos, the first two have the brackets on each corner. The ones with the fire turned on don't have the top brackets. I was eager to try them as soon as I could. As you can see, the lack of top brackets give the shield a 'clean' look but also makes them uneven since the glass shifts with heat. So, in the end I opted to put brackets on all corners for stability and sacrifice the look a little.I hope this helps others who are contemplating buying this brackets.
jose
Reviewed in the United States on January 27, 2021
Worked well. I just hope the silicone gummies that hold the glass don’t melt
Meridian USA LLC
Reviewed in the United States on June 29, 2020
Highly recommended. Great Product and Quality. Professional Look and Very Sturdy.
Ken L.
Reviewed in the United States on May 30, 2020
I bought these to make custom wind shield for my fire pit. Although they aren’t perfect they definitely do the job. The finish is just plain aluminum and if you use anything less then 3/8” glass, you might have issues with the screws not holding. For my situation they worked great and the price was right.
Customer
Reviewed in the United States on February 7, 2020
Great
Steven Lough
Reviewed in the United States on September 11, 2019
exactly what I needed
Recommended Products