Shopping Cart

Your cart is empty.

Your cart is empty.

Replacement Handlebar Riser Top Clamp for 1993-2014 Electra Glide Ultra Classic Road Glide Road King Sportster Street Glide Ultra Limited Anti Slip for 1 inch Clamping Ape Hangers Black

Free shipping on orders over $29.99

$33.99

$ 17 .99 $17.99

In Stock

About this item

  • Aftermarket replacement, No installation instruction included, Please verify your own measurement of mounting hole center before order
  • Try this top clamp to help lock in your ape hangers since the OEM wouldn't cut it as the bars would slip, Simply secure allen head set screws to lock handlebars into place that will effectively decrease handlebar slippage
  • Package includes: A top clamp, No hardware or riser bushings included, Works with your stock risers and bolts
  • Warning! No matter how much it decreases movement and slippage, for Safe Riding, No Yank On Your Taller Bars, Test riding as always
  • Fitment: for handlebars with 1" clamping area on 1993-2014 FLH, FLHTCU, FLTR, FLHR, FLHX, FLHTK, Exclude 2015 and up Road King and Road Glide models


See what customers have said:
1. Easy to install and work great! My 14 inch bars used to wiggle but quite solid as a rock now.
2. Had it for this spring summer and fall, so far awesome! Holds the ape hangers really strong. The 2 stock ones always slid... this has been knurled so it really grip the bar, plus it has 3 set screws to really lock the bars in place.
3. Installed on my 2008 for Harley Sportster. Item worked perfectly to get rid of factory top clamp with built in speedometer and indicators. Holds bars tight, and has set screws to lock bars in if you are running taller handle bars like Apes.
4. It will work as long as your bars drop down to 1" in the clamping area. I installed it on a 1997 softail with 16" apes and it worked good. I drilled little dimples in the bars where the 3 set screws hit the bars for extra holding power.
5. Glad I replaced the stock clamp on my 2019 Street Glide when I replaced the handle bars. Look into replacing your riser bushings at the same time. The extra set screws really help secure the new bars to the clamp. Lighter weight but held better than stock.
6. Worked perfect on my 2005 Road King with 22inch bars. My bars are finally locked down tight and don't move at all. I wish I would have found this product sooner.
7. This was the perfect fix to prevent my new 16" apes from moving. My 03 CVO Road King came with two piece risers, I think 07 and up came with one piece. The two piece risers just wouldn't hold the bars regardless of how tight you secure the screws. I ordered this top cap and once I got the bars in the position that I could use my windshield I ran the 3 set screws into the bar and it was all finished. with the windshield off obviously is when the greatest pressure is on you to pull back and that's when my bars were moving. I rode a couple of hundred miles like that to test it and they were still rock solid.


chris stanley
Reviewed in the United States on February 16, 2024
Highly recommend and fast shipping
Kira
Reviewed in the United States on March 16, 2022
This is a have to have item for taller bars. Great quality and great hold. I highly recommend this clamp.
wbruiser2
Reviewed in the United States on August 23, 2021
I’ll give it 5 stars because it seems like a good quality clamp. When I ordered it, I guess I overlooked the up to 14 part. It will bolt right on no issues and first will hold the bars solid. After two months, I pulled on the bars a little bit to situate my self in the seat and the bars came back a few inches. Long story short, I tried to re-torque them and nearly stripped the threads in the risers. Then I compared them. I guess the difference in height prevents one from torquing them down properly. I didn’t know there was a difference between the HD’s that came with a solid one piece clamp. Stock clamp on an 09 and 17 look identical. My advice: READ the description. If you have a 15+, go with a Paul Yaffe clamp.
TOn
Reviewed in the United States on July 28, 2021
My installer used the stock top clamp, which allowed my bars to fall back a half an inch when I rolled over some railroad tracks. I installed this too clamp about a month ago and my bars now feel SO Much More Secure.
M. Andrade
Reviewed in the United States on October 7, 2021
I have a blacked out bike however this specific part is not visible on my bike, however it fit and did the job on my new bars.
John Ranieri
Reviewed in the United States on September 28, 2020
High quality, easy to install. Use locktite for a great long term installation , hold my 18" apes up with fairly aggressive riding unlike the factory H.D one
DScriv
Reviewed in the United States on August 15, 2020
My bars kept rattling loose with the hard Harley riser due to paint, grooves rubbed off. I put these on and tighten everything down and haven’t had an issue since. Worth the money.(1) CON- Only issue is some of the additional top Allen screws strip easy so don’t over tighten them.
Rob
Reviewed in the United States on July 8, 2020
Worked great on my 05 sporty with 16" apes looks great and the bars are locked in place
Recommended Products