Your cart is empty.
Your cart is empty.From the Manufacturer
Crankset Aluminum Road Steel Without bottom bracket Double chainring 170mm crankarms 34/50t 7-speed Square taper Black
Dave B
Reviewed in Canada on August 3, 2024
I decided to use just a larger front chainring and bigger rear gears
Stephen
Reviewed in the United States on May 15, 2024
Sturdy, good weight, well built.
Customer
Reviewed in the United States on May 11, 2024
This crankset I purchased had a few manufacturer defects including: teeth that appear too short or broken on large ring and the space between the teeth are too sloped, the chain will slip.
Internet Hobo
Reviewed in the United States on June 14, 2023
I was able to make the crankset work on my 2006 Specialized Roubaix Pro. It has custom freewheel gearing of a mountain bike 11-34 Nine speed cassette. I live in a very inclined hill area. I was able to make it work on my bike by changing the bottom bearing bracket to a smaller spindle axle. My new chain was cut down a few links to make it work, due to my old chain ring being a larger size.I spent about an hour mainly climbing uphill on and off 7 miles. So far so good, I have no issues or complaints over the rigorous testing I had done on it.
Montasir Abdelrahim
Reviewed in the United Arab Emirates on March 24, 2023
Very Happy
Einar A.
Reviewed in the United States on April 27, 2023
It work for me
bootbuyer
Reviewed in the United States on April 16, 2023
I've only done two rides with this crankset and several of the teeth on the large chain ring have already broken. It's still functional but it's surprising for a Shimano product.
Pedro Mejia
Reviewed in the United States on January 25, 2021
Muy buena calidad, se siente la diferencia. Mi bicicleta GW trajo un kit de arrastre genérico de baja calidad que duró 8.000 km. El Tourney se siente mucho mejor y funciona perfecto con el grupo
Jakeishness
Reviewed in the United States on June 5, 2018
Got these cranks to upgrade my vintage cranks which were messed up! They look great on the bike and ride well! Will be getting a full tourney upgrade! Bike here is a peugeot ao8 / uo8 with a 110.5 mm spindle which this crankset calls for.
DA MIKE
Reviewed in the United States on December 19, 2012
This is a square tapered crankset. It came with a liitle plastic guide to properly space it with your front derailleur. Installed this using the Park Tool crank remover. I've put around 500 miles on it and I haven't noticed any issues since installation. The 34 tooth comes in handy when fatigue sets in and there is still that one last bridge or hill. Overall another great purchase from Amazon.
Recommended Products
