Ich habe mir diese Kamera für meinen Transporter zugelegt. Durch die Funkübertragung ist die Installation sehr einfach und schnell erledigt. Die Kamera verfügt über eine exzellente Auflösung und hat verschiedene Einstellungsmöglichkeiten wie z.B. der Hilfslinien, Kontrast, Helligkeit usw. Die Funkkamera muss einmal vollkommen geladen werden, und hält durch die Solarladung bei mir mehrere Monate.Ich bin mit diese Rückfahrkamera vollkommen zufrieden, und kann diese uneingeschränkt weiterempfehlen.

Super invention. Surtout sur un fourgon aménagé, au vu de la complexité de passer un cable sur 6 mètres avec meubles et passage porte arrière ! Super qualité d'image. Bonne connexion sans parasitage. On deballe, on allime et ça fonctionne. J'ai fait appel au support client, Miranda est super réactive et répond a toutes vos problématiques. Top

We purchased a Solar Wireless Backup Camera with 5" 1080P Monitor. It was easy to install and it worked great for months. We left the vehicle in a dark/hot garage and didn't drive the vehicle for several months. When we did drive the vehicle again, the battery appeared dead. We contacted Foxpark support since we had misplaced the charger cable, and they noted that we needed to use a USB-USB micro cable and advised us where to get it. After trying to charge it, we found that the battery was dead. Emma at Foxpark support had continued to follow up with us to make sure that we were satisfied. After I noted that the battery wasn't charging, she offered to replace the camera/battery as she wanted us to be satisfied with our purchase. She noted how to pair the new camera, and later followed up to make sure we were successful with the new install. The support couldn't have been better, and I would highly recommend Foxpark backup cameras to anyone needing one. Having taken the vehicle to several BMW dealers and several other businesses that told us they couldn't install a backup camera on our vehicle, we are very satisfied with our Foxpark back-up camera, how easy it was to install, and the incredible support that Foxpark provides.

pratique, pas de grosse installation à prévoir, mais sécuriser la fixation de la caméra, vu le poids de la batterie incluse, très bonne autonomie avec un minimum de soleil, et excellent rendu de l'image

The camera operation, overall, is good. We have in mounted in an 07 Toyota 4runner. Finding a place to mount the camera was a bit of a challenge, but I chose a smooth portion of the dash above the cup holders. The problem lies in that the mount will turn loose in the heat of the car. I ended up ordering the plastic discs that you would mount a GPS to and had to modify these and the suction mount with 3m double sticky tape to get it to stay... The rear mount, I had to do basically the same, there was no good way to mount it to the tag of a car with a lift gate without it banging on the paint each time we close the gate. Overall, I got it worked out, but not because of the manufacturers innovations.....The company has very very forth coming about making this issue right by offering a new camera and refund for the mounting disc. I’m certain they will correct the issue.

Camera works perfectly. Easy to set up. The only problem I had was that that, after it was installed on top of my license plate, it impeded my easy access to the tailgate handle of my Dodge Grand Caravan. However, there was an easy fix. The unit comes with a double-sided adhesive foam that fits to the back of the camera, and allows you to place the camera at the bottom of the license place. I needed to use this, since my license plate didn't have any screws on the bottom.One thing I was concerned about when I ordered the camera was that I thought the only "on/off" switch was on the plug in to the cigarette lighter, which, in my vehicle, was at the bottom of my console near the floor. However, I was very pleased to see that there are also on/off buttons, along with two others to help make necessary adjustments, on the camera itself. The camera is mounted on my dash, within easy reach if I need to turn it on.My vehicle is equipped with two cigarette lighters -- one provides a continuous connection, even when the vehicle is turned off. This is useful when I'm camping and need to charge my phone overnight. The other only provides a power connection when the vehicle is turned on. Make sure you connect your camera to this second one (if you have it). With my setup, the camera comes on when I start the vehicle, and I've set the camera to stay on for 60 seconds before it shuts off. If I need more time with the camera on, I just push the button on the side of the camera, and it comes on for another 60 seconds. At any time, you can adjust the camera settings to stay on for 45 seconds, 60 seconds, or 90 seconds.

Wanted a backup camera to make sure that I did not run over anyone or hit anything while backing my vehicle in busy places. Wanted one that was easy to install without a lot of complicated wiring changes to my Dodge Caravan . Found this wireless camera with a built in solar charger that backs up a large built in rechargeable battery that lasts for a very long time in the event of no sunThe unit came packaged extremely well, and on opening and examined was very well built and rugged, no cheap plastic stuff here. It comes with the wireless camera transmitter unit with an attached mounting plate , a nice 5 inch receiving screen , a windshield attachment mount , a power cable and a charging cable for the built in battery that backs up the solar panel in the sending camera. The unit also comes with a two sided sticky mount if you want to go that way. The camera has an attached mount that fits onto your front or back license plate using existing bolts. Takes no time at all to attach it to your vehicle. The receiving screen mounts onto the windshield with a adjustable pretty powerful suction cup and plugs into your vehicles power outlet. When you start the engine the unit powers up and activates the camera . The picture is very clear , bright and gives you a pretty wide view of what's behind you. There are buttons on the right hand side of the unit that controls the power on off and the menu of setting options which includes guide line on or off and size of guides, brightness and contrast and time of operation after it turns on . If the picture turns off too soon a touch of the power button on the side turns it back on for another cycle . The units automatically paired with each other when I first powered up which was nice. The receiver can receive from 2 cameras if you buy another one for the front and there are instructions in the instruction booklet on pairing the second camera. I was up and running inside of 30 minutes and so far the unit is performing excellently. I am very happy with this wireless backup camera and as it was a lot less money than other units I researched I think that it is very good value for such a sturdy well built unit. I will edit this review after I have had it for a few months or earlier if things go bad.

I have a base model 2015 NIssan Altima and it doesn't have a back up camera. I have driven other vehicles that had this and it always helped me. I have depth perception issues and I don't back into parking spaces and sometime I have to adjust my parking even when I am pulling forward. I have a hard time judging whether I am in fully inside my garage and have had my garage door hit the back of my car a couple of times cause I didn't pull in fully. I didn't want to pay thousands of dollars to have my console upgraded and a backup camera installed and so I went searching for a wireless option. The only problem is that even though most of them are wireless they still require you to wire into your reverse light in order to work and this was out of my skill level. I wanted something I could install easily and didn't require any wires. I stumbled upon the solar options and after many reading many reviews, I finally decided on this option. The shipping was fast and when I got home from work on the day that I received it, I started to install the unit. Now, for people who know exactly what they are doing, this is probably a 10 minute install but I went in with several assumptions and that delayed the install.First, I thought I was going to be able to install the camera onto the license plate at the top; however, my license plate is located in a recessed area of the truck and is already situated close to the top where the trunk release button and so if I placed the camera there, I would never be able to open my trunk. (I attached a photo that where I circled the truck release so you can see how close it is to the top of the license plate).Second, my car didn't come with holes for the bottom of the license plate so I was unable to have it secured to the bottom part of my license plate as well. I was thinking I would have to send this back but then I remembered the sticking strip that was sent with the camera. This was actually a better option for me since it allowed me to affix the camera to the right of center which actually put the camera part itself almost dead center of the car. I attached a couple of photos to show the camera on the bottom and how the actual camera part is almost center.I removed the license plate completely, cleaned the entire area and dried it completely. Determined the placement of the sticker and then applied it. I then placed the camera still attached to the bracket onto the sticker and held it in place for a few minutes. I then cleaned off the license plate itself and replaced it.I then moved onto figuring out the placement for the monitor. I have a non textured area directly above my console that I initially tried to place the monitor; however, that area is slanted and the monitor wouldn't stick. It kept falling off! The instructions state to place it on a non-textured flat surface. The rest of my dashboard is textured but I have more options of a flat surface. Placing it on the windshield is not an option for me because then I wouldn't be able to use my sunshades in the summer time. So I found a place that was in line with the driver's view and it was a little farther back where it was flat and although it was a textured surface - it stuck! And I mean it stuck solid! After I placed it on the flat area, I had decided I was going to adjust the position just a little but it was so solid that I decided to leave it alone. After watching several YouTube videos, I was able to figure out how to pull the trim off my dashboard which allowed me to hide the extra cable behind my radio and a small hole was just above the area where my cigarette lighter. You can see from the photos I attached that only a small portion of the cable from the monitor is visible where the monitor is at and down where the product plugs into the cigarette lighter.So I put several objects behind my car at different distances and with the help of my son, it allowed me to adjust the camera to the proper level. I have been driving for over a week with this product installed and I just LOVE it!. I no longer have anxiety pulling out of a parking spot and hoping there is enough distance between me and the cars parked on the other side. I backed into my garage for the first time and it was a breeze. When I pull forward into my garage, I no longer have to get out of the car to see if I have pulled in enough to clear the door, I just hit the monitor and line up the grid line to the line on the cement that separates the garage from the driveway and viola, I am in with no problems. The grid lines are slightly off on one side because the camera isn't dead center. (I wish now I would have installed it more center than I did but the sticky stuff they sent works really well and I'm not getting it off to readjust the camera). After driving with this product and the installation issues that I ran into, I have a couple of suggestions for those of you who are like me.Before the product arrives, visually look at where your license is at and determine how much space you have between the top of your plate and the trunk release and also if you have holes in the bottom to mount there if needed. This product is bulky. Also look for flat area on your dash board to mount, flat is more important than smooth texture. IF I had done this before hand, I would have saved a ton of time when I went to install it.My next suggestion is based on my need for accuracy of the grid lines. I would highly suggest to avoid mounting the camera onto the license plate with the screws because that puts the camera itself on the side and thus the grid lines will not be accurate. If you are after a cleaner look or don't rely on the grid lines to park/maneuver then this suggestion will not apply to you; however, if you don't mind the look of the product being off center or need accuracy for the grids, then use the sticking tape that comes with the product and mount it where the camera will be dead center. As I said before, I wish I had mounted it a little farther over than I what I did so that the camera would have been center but that ship has sailed cause its stuck so well that I can't move it! Also, my cigarette lighter area is down in a recessed area of the console and I found that I had to lean forward quite a bit in order to hit the button to activate the monitor. So I went ahead and purchased a splitter that brought the power button up out of the recessed area. It not only made it easier for me to reach the power button of the monitor but it also gave me another cigarette lighter port for other devices that require that. You can actually see that splitter in the photo where I am showing the wire under the console. I would suggest getting a splitter if your cigarette lighter area is a little out of your reach. I have placed the URL here for anyone who wants to know. (https://www.amazon.com/dp/B07FDQLL7K?psc=1&ref=ppx_yo2ov_dt_b_product_details).I am so happy with this purchase and if I ever get another vehicle that doesn't have a backup camera, this is going to be my first purchase for that vehicle! If you are after something easy to install, easy to use, and doesn't cost you your first born to get - then get this camera! Highly recommend!