Your cart is empty.
Your cart is empty.• For Super E, Tillotson, Bendix & Keihin butterfly carbs 1-7/8″ opening, 3/8″ thick
Edward D. Zimmerman
Reviewed in the United States on February 19, 2025
Didn't use but would have worked had i went the route i was headed.
Danny Macc
Reviewed in the United States on March 8, 2022
It added space between the I take and the carb! That’s what a “spacer” does. It works well
John Rayner
Reviewed in the United States on August 29, 2021
product was a perfect fit
Grant.
Reviewed in the United States on June 25, 2021
expensive but worth every penny keeps an s&s from vapor locking and its required when using a standard breather bracket to secure the carb too, thought i was hopeless but this solved the issue, you will need longer bolts to accommodate the insulator
Hollywood_36
Reviewed in the United States on April 18, 2021
Product was perfect!! 1 7/8” hole.
Mark
Reviewed in the United States on September 29, 2019
Worked great on my sportster.
Mr. Big
Reviewed in the United States on August 16, 2014
The carburetor can get very hot due to high temperatures from the manifold and cylinder heads. This spacer will insulate it and keep the carburetor cool. It is a good idea to use one of these blocks. They come in a few sizes but the 3/8" spacer keeps the carburetor cool. The spacer fits the S&S Super B carburetor i use perfectly. .
B.D. Stock
Reviewed in the United States on October 27, 2014
Had an issue with my S&S Super E carb getting too hot. The carb needed a thicker insulator to separate it more from the heat generated at the manifold. The hot engine temps caused vapor lock in my 93" Stroker Shovelhead and the additional space gained from this 3/8" S&S Insulator Block cured that issue.
Recommended Products