Your cart is empty.
Your cart is empty.Pole Mount for Starlink Gen 3, Pipe Adapter Mounting Kit, Stainless Steel Mount Plate Roof Mount Compatible with Starlink Standard Dish V3 Kickstand Dishy Starlink Gen 3 Pipe Adapter Starlink Pole Mount Starlink Gen3 V3 Standard Dish Mounting Kit Starlink Gen 3 Mount Starlink Roof Mounting Pole Pipe Connectors Pole Mount Adapter Mounting Kit starlink pipe adapter
Doogie
Reviewed in the United States on December 13, 2024
I purchased a couple of different mounts because I was planning on installing my starlink on an existing satellite dish pole and wasn't sure the exact size before getting up there. Turns out the pole I'm mounting on is just about the same size as the opening in this mount. This mount's 'opening' is very slightly conical on the inside diameter (thinner at the bottom of the mount than at the opening) and so the fit on the pole wasn't great. Also, although I don't know if it would make a material difference, the tapped holes where the attachment studs go into the mount weren't perpendicular to the mount in all cases (you can see in my 3rd picture how they're "off" on one side)Because of the fitment issue, I went with a different mount that had a slightly wider opening (still measured only a couple of mms more than 2", but was the same diameter all the way down) and thicker adjustment bolts.If you're mounting onto a pole will a smaller than 2" diameter, this unit would be fine. The unit itself is metallic and is very solid. It's quite weighty too which gives confidence in the product if you're using this to mount a Starlink dish, but if your pole is right at 2", this unit might not work well for you.This unit comes with two sets of adjustment bolts, the shorter ones as fitted in my pictures, and then longer bolts as well for fitting onto a much smaller diameter pole. Allen wrench also provided.
Recommended Products
