Your cart is empty.
Your cart is empty.Product Description
Easy to Apply
Thanks to its lower viscosity, it's suitable for both full- and hidden-tang applications; Mix at 1:1 ratio.
Premium Epoxy
The Blade Pro cures at 70°F, developing excellent properties within 12 hours. Machining can be done once the knife epoxy has cured for 12-14 hours.
Tips and Tricks
After clamping the handle material, wipe off the excess glue with acetone. Wait 2-3 hours to set up and clean one more time using a q-tip wet out.
Versatile Application
This epoxy resin glue creates strong & flexible bonds to wood, Micarta, G10, composites, as well as non-ferrous metals & stainless and carbon steel.
A Knifemaker's Best Friend
We're not kidding when we describe this epoxy glue as "cutting edge." With next-generation technology enabling tenacious bonds between dissimilar materials, Blade Pro is without peer as a knifemaking adhesive.
Rainerio G.
Reviewed in the United States on March 7, 2025
Can’t find it in the house ?
cltinseattle
Reviewed in the United States on March 2, 2025
I have made two knife handles with this now, as opposed to the 5-minute epoxy I used to use. This gives you a long open time which is a good thing. It adheres really well. My one complaint is in drying/curing time. It takes a really long time to completely set. I mean, in my roughly 55 - 60 degree shop I had to let it sit 2 days before my finger wasn't feeling a still sticky surface. I like it though, if you have time on your project to let it sit that long.
Lucie S.
Reviewed in the United States on January 26, 2025
Not a knife maker but recreated new scales made of mesquite wood for several Wusthoff knives of which the scales had cracked (shouldn’t happen on knives in that price class but that’s another story). Came out as good as can be expected from a guy without experience. Product worked perfect!
STEVEN W. TOWLES
Reviewed in the United States on January 17, 2025
cure time on temperatures 70 degrees or less I used this for knife handles
JK
Reviewed in the United States on April 5, 2025
I needed a slow setting epoxy for the knife scales, (6 pins), 20 minute set up to fast.
MaryAnn Ziminski
Reviewed in the United States on August 4, 2024
No results as yet but in comparison to system 9 it is thinner and on initial use I am very suspicious. I will probably not use this again on my knife handles unless I an going to use a rivet for holding
Nick
Reviewed in the United States on May 16, 2024
Good product, Id recommend with no hesitationWould give 4.5 if I could, losing only half because it dries more on the opaque side, but function over fashion it's great
P. Nelson
Reviewed in the United States on October 1, 2023
I was really gratified by the results, thanks in no small part to this epoxy. Super solid product. Bonded strongly to both wood (walnut) and metal, and filled the small gaps cleanly and effectively.
Recommended Products
$215.23
$ 89 .99 $89.99