Your cart is empty.
Your cart is empty.The ROP Shop | Lower Shift Cable Kit for Mercury MerCruiser Bravo One, Two & Three Sterndrives. Please review all product information to ensure that this product is compatible with your unit. Our staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us...we get it. Let's work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: ▪ Model and/or Sub-model ▪ Spec and/or Type Number ▪ Code and/or Serial Number ▪ Year ▪ Engine Horsepower. Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.
Jason B.
Reviewed in the United States on May 23, 2024
I putchased this instead of OEM much cheaper. The sheath works great. I put some cable lube through it. The cable itself is the correct lenght, but the barrell end is to BIG for the stern drive, just by a hair. Ould probably file it to fit, but bought oem locally.Seller was quick to ship no complaonts there. I have purchased other items from the ROP shop. I would ask for a return but sheath of itm is being used.
BIG daDDy
Reviewed in the United States on January 14, 2022
Boy do i feel like a dummy for not reading the other reviews. I had bought a different mercruiser part from ROP SHOP before and it was great so I guess that is why i didn't think to read the reviews for this one. It doesn't fit, the end piece is too big for the shift linkage to grab it properly. What a headache.
Steven Faulkner
Reviewed in the United States on July 30, 2021
As stated on other reviews, it is not made for a Bravo 3. It is extremely weak cable, it broke putting it together where you mount it on the motor side. It will not fit in the capture tray in the lower unit without grinding down the length, its too long. DO NOT BUY FOR BRAVO 3.
mikeH
Reviewed in the United States on July 29, 2021
These absolutely will not fit a bravo, the end on the cable does not fit in the cup in the lower unit. It took a long time to figure this out, had to pull the outdrive apart to see its too long to slide in the cup which is hidden when the drive is on.
William Woodman
Reviewed in the United States on July 19, 2021
This lower shift cable is extremely poor quality. The stainless cable guide does not thread into the brass end on the cable guide. The plastic is so flimsy it bends when shifting . Very poor quality and I will be eating a lost labor sandwich due to the poor quality.
David Colfelt
Reviewed in the United States on July 16, 2021
I don't write a ton if reviews, but I'm hoping I can save you OVER A DAYS WORTH OF HEADACHES. The photo showing the three cables has this piece of junk on the left, another aftermarket shift cable in the middle and an OEM cable on the right. Notice that this cable end is larger..it won't fit in the shifter on the drive.The other photos have the shifter from the drive (removed) showing that the other 2 cables ends fit...and this one doesn't!I'm not a boat mechanic, but I have removed and installed over a dozen Bravo/Blackhawk drives and never had this problem. The drive has to be almost mated up when the shift cable engages, so you can't see what is going wrong. I had to take the case of the drive apart and remove the shift linkage to find the problem. Wasting my time!Look at the other reviews. This won't work. Don't waste your time!
ann w reeves
Reviewed in the United States on June 27, 2021
Ordered this ROP branded shift cable for a 1996 Bravo 2 drive. Nothing about it is good. the nub on the end is to large to fit into the Bravo's shift clip so it had to be ground down and shortened. After shortening it sufficiently with a file I discovered that it was now loose on the end of the cable. To keep the end from pulling off when shifting I had to braze the nub onto the cable end and then again redress it to fit in the clip. Next problem is that the ferule end that fastens into the Bravo helmet is longer than the original so when the shift clip moves forward it hits the end of the ferule and will not allow full travel. You guessed it you get to remove the drives, pull out the cable and shorten it to make it functional. If you want to save a little money and have time and tolerance for frustration, this is an excellent product. If on the other hand you want a well designed and constructed product you should look elsewhere.
Customer
Reviewed in the United States on June 23, 2021
Worst cable ever the little cat jumped on the end of the cable was too long so it doesn't fit in your shifter arm assembly so I ended up having to spend it an additional 2 hours on this job grinding and trying to make make it fit never again will I buy something that is an oem or will I ever buy anything for these folks cuz it is a scam
Recommended Products
