Shopping Cart

Your cart is empty.

Your cart is empty.

Transmission Slip Yoke 3-3-2431X for GM Turbo 400 TH400 Muncie Super T10 1350

4.6 (4) Write Review
Free shipping on orders over $29.99

$33.99

$ 15 .99 $15.99

In Stock
  • Slip Yoke for GM vehicles with 1350 Series u-joints, 32 spline and matching measurement specs.
  • Compatible with Neapco N3-3-2431X, Compatible with Sonnax T3-3-2431CBHP T3-3-2431CBH Trans Slip Yoke with counter bore, Compatible with PTI 3503-326 3503-324 Slip Yoke Bolt on uses Strap Kit, This part is compatible with: 5-1350X U-joint
  • The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.
  • If you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5" short barrel counter bored slip yoke.
  • Fits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E and confirm dimensions for transfer cases fitment.


Product Description

3-3-2431X

Series:1350

Style: Outside Snap Ring

U-Joint Cap Diameter:1.188 Inch

U-Joint Width:3.625 Inch

Slip Yoke Length (Center Line to End of Spline): 5.500 Inch

Barrel Diameter:1.885 Inch

Spline Diameter1.378 Inch

Number of Spline:32 (31 with blind spot)

* The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.

Part Number:

Compatible with Neapco N3-3-2431X Trans Slip Yoke with counter bore

Compatible with Sonnax T3-3-2431CBHP Trans Slip Yoke with counter bore

Compatible with Sonnax T3-3-2431CBH Trans Slip Yoke with counter bore for roller bearing tail housings

Compatible with PTI 3503-326 Slip Yoke

Compatible with PTI 3503-324 Slip Yoke Bolt on uses Strap Kit

Compatible with U Joint:Compatible with 5-1350X U-joint

** If you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke. **

YK3-3-2431

Transmission Shaft with O-ring

Slip Yoke With Counter-bore

3-3-2431X

Transmission Shaft Without O-ring

Slip Yoke With Full Spline


El Papi Oso
Reviewed in the United States on July 22, 2024
Slides right into my 700R. Count spindles before you buy.
moose
Reviewed in the United States on December 5, 2024
Exactly what I need it and arrived a couple days before due date I will buy from them again definitely it is a great product
Andrew
Reviewed in the United States on August 3, 2023
The overall finish is a little rough around the edges in a few minor areas but dimensionally it's correct when compared to a genuine Spicer yoke.The one I received is actually counter bored so it could technically be used on an output shaft that originally used a bolt on yoke without having to machine the o ring grooves off the shaft.I did confirm spline engagement in one of my TH400 transmissions and it fit without issues.Would I use it on a drag race application? No I wouldn't because there's simply no way for the average person to test the true quality/purity of the metal and a few dollars saved isn't worth taking a chance. With that being said, I believe it would be perfectly fine for stock replacement or perhaps mild performance usage.I give it 4 stars overall and consider it to be a decent purchase overall.
Aliviana York 2.0
Reviewed in the United States on October 13, 2023
Part comes in a generic box.All the listed dimensions measured accurately, the ID splinesstop 0.575 inches from the end.There were some cosmetic blemishes, and the OD shaft is nota super smooth polished finish, but it should work just as wellas a stock replacement part.I did confirm it fits a Muncie M20.Not for high horsepower or heavy 4x4s.