Your cart is empty.
Your cart is empty.TRITAN Finished Bore B-Hub Sprocket features one setscrew over the keyway and a second setscrew at 90 degrees. With high quality carbon steel construction, this sprocket with 1/2 inch pitch has 28 teeth and 3/4 inch finished bore. Sprocket has a black oxide finish and is heat treated. ANSI sprocket # 40. TRITAN produces world class power transmission products using select alloy steel, advanced quality control and testing systems to ensure the highest quality.
DoNotTrustReviews
Reviewed in the United States on July 10, 2019
The bore was .71 not .75 - 3/4 of an inch as advertised other then that the quality of the sprocket was very nice.
daniel sparks
Reviewed in the United States on November 26, 2019
My biggest issue was the bore size. This was off by about 1/16 of an inch. May not seem like much, but I had to rebore this to get it on my axle. That cost me another 25$ for a bore bit. Mostly because I didnt have the wait time for a replacement. Issue 2 was the set screws. They are only 5mm deep and collapsed on me. Destroyed the key and set screws. Not necesarilly manufacture error. Also the teeth were super thick. Ive used a lot of #40 sprockets and Ive never had to grind one down so the teeth will fit in the roller.
Mtodd
Reviewed in the United States on November 29, 2018
Exactly what I needed. Heavy duty.
Recommended Products
