Your cart is empty.
Your cart is empty.Product Description
.750" 3/4” Rod End Heim Joint KIT Left and Right hand thread
Benefits of your new heim joints.
- Includes 1-right hand thread 1-Left hand thread Heim set. Spacers Jam nuts and tube adapters included.
- 3/4” 16tpi Thread
- Misalignment spacers fit 5/8" standard bolts (Grade 8 or better recommended)
- 1 7/8" mounting width.
- Tube adapters fit 1.00" ID tube (inside diameter)
- 1-piece design Heat Treated steel
- Never needs grease
- 28,000 Pound static load rating
- Mounting width is 1-7/8"
The race is Teflon impregnated nylon for superior durability. These rod ends have a 3/4” Shaft with 16tpi. The 3/4” bore is the strongest way to make this heim.
Jam nut is included
The 3/4" jam nuts are included in this kit. Both a left and a right nut are included.
Wled in bungs
Tube adapters fit 1.00" ID tube (inside diameter)
Left and Right are included,
Misalignment spacers included
These spacers reduce the hole to 5/8". You will use a 5/8" bolt for mounting these.
JessS
Reviewed in the United States on April 26, 2025
Amazing quality heims, was surprised by the quality given the price. Highly recommend! Customer service also great from seller
Money saver!
Reviewed in the United States on June 11, 2024
I love these, been using them on all kinds of stuff. Had a few sets come incomplete but the seller had replacements coming before I returned the incomplete kit! My truck is built and I beat on these and they have been holding up. Nothing bad to say about them.
Samuel Friesen
Reviewed in the United States on January 15, 2024
Used on front end of axle swapped jeep for steering linkage, works perfectly for this, steering is tight as ever when running 37s
Fordraceboy
Reviewed in the United States on September 20, 2023
First order did not have all the parts (missing LH heim). The plastic bag had been cut open and re-sealed with packing tape. Replacement was sent immediately, however the plastic bag had been ripped open and contents were scattered in an empty box. All items were accounted for, but one jam nut was lodged under a flap of the box.Decent product, very poor packaging and shipping.
Sim Guy
Reviewed in the United States on March 21, 2023
Well made, solid, accurate Heim joints. Delivery to Australia from the US was much quicker than I expected. Very happy!
Fr not a bot
Reviewed in Canada on April 23, 2023
Gurthy unit well built TIGHT tolerances well made but they jiped me 3 downsizers
Brianna
Reviewed in Canada on November 17, 2022
Perfect for my off-road application. Recommend this product and will buy again.
frederico
Reviewed in Canada on January 28, 2022
jai recu seulement la moitier du colis
Mike
Reviewed in Canada on February 12, 2021
These rod ends came both left hand thread with no jam nuts and right hand thread adapters don’t buy these unless you want to spend more money buying the proper hardware
Patrick
Reviewed in Canada on October 8, 2021
Using these to make adjustable torque rods for my lifted station wagon. Both showed up correctly. Left and Right hand thread. Quality seems good.
ftt
Reviewed in the United States on January 18, 2021
Good quality heims I used mine for tie rod and drag link ends welded in 1.5x.25 wall dom. Only problem I had was one weld in bung was .04 too big and had to be ground down. One out of 4 I guess the bung quality control is a little off but it wasn’t really an issue
Customer
Reviewed in the United States on September 28, 2020
I am building steering crossover for my 97 jeep tj. I am still waiting for my tubing to show up so I have not tested the joints yet but they are heavy duty and look like they will get the job done.
Jags1021
Reviewed in the United States on February 16, 2020
Really good quality and heavy duty strength. Comes with extra hardware to install them and they also look good. You can use them for any application, I used them to make a anti-wrap bar/traction bar. They work good and look amazing. I made this for a 2000 jeep cherokee xj.
Recommended Products