Your cart is empty.
Your cart is empty.Product Description
Feature:
- This pump is a gear pump, the best kind of pump for oil scavenging.
- Seamless Shell Design.
- Thermally Protected High Quality Efficient Motor.
- Rugged bronze body and stainless steel shaft .
- Can be mounted in any position
- Gear design for maximum scavenge.
Specifications:
- Voltage: 12V DC
- AMPS:6.5A 80W Flow capacity: 12 Litres per minute (3.2 Gallons per minute)
- Liquid Temperature:140°F (60°C) Max. Self-priming - Max. lift 3M
- Outlet Dia: 3/8" FNPT (9.52 mm) thread fitting. Twin core wire Current Draw: 7 Amp (max. 10 Amp)
- Dimensions: Length 155.5mm x Width 119mm x Height 103mm
- Approvals: CE
Es bueno
Reviewed in the United States on March 26, 2024
Bueno
Customer
Reviewed in the United States on March 6, 2023
Very good pamp
Brad L
Reviewed in the United States on March 15, 2022
Good pump kinda noise but works well
Javalos02
Reviewed in the United States on October 5, 2022
Suction on this product is great and great buy for the price.
David estes
Reviewed in the United States on July 24, 2021
I wish I could give a better review. Runs well, stays cool, solid mount. Now the down side.... the fittings this come with are very thin and cheaply made. The treads on the pump are over cut so the fittings will not torque and seal. Replaced the fittings with better quality and used pipe dope to get them to seal. Got everything set up and Applied power and immediately popped a fuse. Installed a new fuse and hooked up backwards and it runs fine. So no this pump is not reversible and the flow sticker on the top of the pump was 180 out. Had to remove the pump and reinstall upside down. Thank God I did because after 15 minutes of use the pump started leaking. This would have allowed fuel to run over the motor, bad news!!! Took the cover off the pump and going NO GASKET ONLY PIPE DOPE!!! Made a gasket and now it is working fine.
Recommended Products