Shopping Cart

Your cart is empty.

Your cart is empty.

1 1/4 Inch Diameter Clear PVC Schedule 40 Pipe [Pipe ID 1.360 inch, OD 1.660 inch] (Bluish tint), Choose Your Length (5 inches to 8 Feet) (Selected Length: 1 Foot)

Free shipping on orders over $29.99

$19.65

$ 8 .99 $8.99

In Stock

1.:6 Inches (0.5 Ft.)


2.MaterialType:Polyvinyl Chloride (pvc)


About this item

  • One piece of 1-1/4 Inch Clear PVC Pipe (SCH40, Bluish Tint)
  • Pipe ID is not exactly 1-1/4 inch. Pipe has approx. ID of 1.360 inch and approx. OD of 1.660 inch as specified by PVC SCH40 specs.
  • Works with standard PVC SCH40/SCH80 Fittings & Cement.
  • Pipe is rigid (not very flexible, but may have a slight amount of flex like all PVC pipe.)
  • Max Pressure @ 73F is 180 PSI.


1-1/4 Inch diameter Clear PVC pipe (Schedule 40), Cut to Length.
PVC pipe is measured by the nominal inside-diameter (ID), not the outside-diameter (OD).
Pipe has an approximate ID of 1.360 inch and an approximate OD of 1.660 inch, per PVC Schedule 40 Specifications. As with all extruded pipe, the inside diameter can vary a little. Tolerance for the inside diameter is +/- 2% of the stated diameter.
This pipe is manufactured in strict compliance to ASTM D1785.
Pipe has a bluish tint to prevent yellowing from UV light (as seen in pictures).
For use with standard PVC fittings and PVC cement.
This pipe should be protected from the sun. Extended exposure to ultraviolet light may cause discoloration and the heat may cause warping.
Length Tolerance: +/- 1/16 Inch
Please note that there is no product packaging with this product, it is just the pipe itself.
Pipe weight: 6.5 oz. per foot.
Do not use PVC pipe with compressed air or gases as it can cause the pipe to explode and create shrapnel.
Item quantity is 1 piece.
How to cut: If you need to cut the pipe, you should avoid using a ratchet-style PVC cutter, as that will likely break this pipe. Instead, use a saw such as a hacksaw, miter saw or radial arm saw, or one of the pipe cutters that you tighten a little, turn on the pipe, tighten some more and turn on the pipe and repeat until the pipe is cut.


Brian W.
Reviewed in the United States on March 26, 2025
Fits and works. Putting it in the suction line for my shallow well pump.
Gary S. Lemere
Reviewed in the United States on February 22, 2025
It's not as cheap as the white PVC but this see-through works if you need to see what's going on
Claudell Gilbert
Reviewed in the United States on March 31, 2024
It was more sturdy than I expected abd clear enough for me to see the flow of fluid I needed to see.
Stephen Witt
Reviewed in the United States on July 7, 2023
Product meets expectations
Ray Terrizzi
Reviewed in the United States on June 23, 2022
Good company, good product, exactly as described
Customer
Reviewed in the United States on January 1, 2022
This clear PVC pipe was used and needed to see my water level. It worked well. I think it was a little pricy, but I needed something clear, and it fit the standard 1 1/4 " fittings.
Customer
Reviewed in the United States on July 2, 2021
This did exactly what I wanted. It allows me to see what is happening with my well pump. I can see the water flow/fill amount of the suction and discharge. I can even see the disturbance caused by the air flow as the pump is pulling a solid prime.
Carl
Reviewed in the United States on April 8, 2021
The pipe was straight and clear. Other sellers have sold warped, sun scorched pipe.