Your cart is empty.
Your cart is empty.Product Description
Customer
Reviewed in the United States on January 28, 2025
Worked very good. Only 2 issues. Over filled me reservoir, and the bleed bottle doesn't work without a vent. You have 15 psi going through the line with no vent in the bottle so it wont bleed. If you loosen the lid it flows out of the bottle. I drilled a hole in the top to make it vent pressure. You will have to pump the bottle but it works better.
andres alhadeff
Reviewed in the United States on April 29, 2025
the pump itself works well enough to get the job done unfortunately the adaptors are of terrible quality, the plastic adaptors are made of a very hard and brittle material and easily brake under pressure, the tabs snaped on my first use. with the proper adaptors this pump should work well.
Tech-Tronics
Reviewed in the United States on April 26, 2025
Excellent concept! However, the plastic caps are not able to hold or maintain continuous 10 Psi pressure. The one cap I was using shattered and fluid splashed all over my engine bay.
Jk
Reviewed in the United States on April 25, 2025
Being single mom sometimes means learning to do ish yo' self. When my teens car blew a brake line, it was mom and youtube to the rescue. Being as I have no patience for the whole, pump 3x times, hold routine with someone, I got this. It worked perfectly and the only thing that got yelled at was the car, the tools and, the pesky brake line. I watched some very helpful videos on the use of the bleeder system and in no time the brake petal was tighter than my pocketbook. It's cheap, it's easy to use and it doesn't take up much room which is exactly why I even named it after me! All jokes aside, this bleeder system saved me this week. So simple even a youtube mechanic can use it.
Kathryn Phillips
Reviewed in the United States on April 2, 2025
I would only give it 4 stars for the quality (it feels cheap) but it really works. This one had multiple brake cap adaptor. I have always had a problem get the brakes tight and this made it easy and I didnt have to ask the old lady or one of the kids to pump the brakes and then argue with them from under they car as to why they cant put their phone down for 5 minute and pump the fricking brakes so i can fix the brakes and we dont go flying off a cliff cause the brakes dont work. its worth every penny no to involve other people
Joshua B.
Reviewed in the United States on April 17, 2025
Not great, the cap adapter is loose and leaks like crazy.Everything else seems to work as far as the pump, but its effectively useless as it wont hold a seal on the master cylinder. I was using the a4 adapter for jeep/dodge/Chrysler
James Ellis
Reviewed in the United States on April 15, 2025
Before adding fluid I dry tested to see if the pressure would drop. Pumped it up without a cap to lek test. Slow leak from 10 Psi to 5 Psi in about five minutes. Soap tested and found the pressure release valve slight leak. Cycled it a few times then it sealed. I wanted to do my Dodge truck, Audi TT and a Taurus which the caps are supposed to fit. The Audi cap would not seal so I added a second rubber seal. That worked except for very small leak out of the quick connect fitting. Dodge fit but would not seal at all. The ford Taurus cap would not even fit. I think they sent two of the four caps of the same type and left out the ford cap. Quality seems fine but the caps are a failure. I'll be sending this back. If caps would have sealed and been correct it would have gotten fiver stars. Very disappointed
Wade
Reviewed in the United States on April 13, 2025
I would give this 0 stars but that’s not an option, the pump hardly works, the caps for ford, Chevy and Chrysler are loose with the seals and leak brake fluid all over. Complete junk and waste of money!!!!
Recommended Products