Your cart is empty.
Your cart is empty. A PROFESSIONAL AND EXCELLENT Hollow Nut Driver NEEDS TO HAVE THE FOLLOWING CHARACTERISTICS:
1. SAVE EFFORT: Tightening nuts by hand hurts your hands and is laborious. Our hollow socket is equipped with a 360-degree rotating socket adapter, which can quickly tighten long threaded nuts while reducing the burden on your arms.
2. HELP YOU COMPLETE YOUR WORK EFFICIENTLY: The 1/4 hexagonal handle design can be connected to most electric drills. Our hollow sleeve can be used with electric drills to quickly tighten long threaded nuts.
3. STURDY AND DURABLE: This set of hollow sleeves is made of chrome vanadium steel, which is strong, stable, wear-resistant, and not easy to break after long-term use.
Attention:
1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
2.Please allow little measuring deviation due to manual measurement.
Luis José Parra Fernandez
Reviewed in the United States on February 20, 2025
Justo como se ve en la foto
Luis Sanders
Reviewed in the United States on April 12, 2025
It was ok, it worked but they sent me a 14mm which is the standard equivalent of 9/16” but it’s not perfect. It’ll get you by.
GARCIA
Reviewed in the United States on September 29, 2024
Se barrio al primer uso
TMJTM
Reviewed in the United States on November 26, 2024
Lasted about a month before becoming too deformed to fit around 9/16 nuts. Incredibly weak socket, you get what you pay for. Light occasional use is fine but not cut out for professional use. It always seemed a bit out of spec but again at $17 or whatever it was when I bought it that's no real surprise.
David
Reviewed in the United States on November 12, 2024
Practico y versatil
Jorge 0choa
Reviewed in the United States on October 8, 2024
Bueno
Life
Reviewed in the United States on October 22, 2024
Hollow sockets like this are great if you do a lot of work with threaded rods, like on ceiling fixtures or ductwork. They can save you a lot of time vs threading by hand.Everything included feels sturdy and well-made, but according to the description it is made of chromium–vanadium steel. The 1/4" hex shank is clearly this type of steel and even a label stamped on. Not sure if the socket itself and the 1/2" adapter are also chromium–vanadium, but if so, this type of steel is NOT impact grade and is actually prone to shattering. This could be an issue and needs to be addressed in the description.If you aren't going to be impacting, I don't have any complaints about this socket. The price is a little lower than the competition, the socket is sized as advertised, and the included adapters are handy.
Jason Bock
Reviewed in the United States on October 1, 2024
It wont fit a 9/16th bolt it says 14mm at the bottom when 15mm is equivalent to 9/16 the product besides that is alright
Recommended Products
$63.09
$ 24 .99 $24.99
$20.07
$ 9 .99 $9.99