Your cart is empty.
Your cart is empty.Product Description
Designed for Continuous Operation
The impeller of the S8038-10K is held in place by two ball bearings, making it not only particularly durable but also less sensitive to external influences such as heat and dust.
Full Control with a wide Speed Range
The S8038-10K has a wide speed range that can be regulated via PWM and voltage, allowing it to be tuned to the specific system requirement. With a wide speed range from 500 rpm to 10000 rpm, it provides an ideal balance between cooling performance and noise, ensuring optimal performance in various scenarios.
High Airflow and Static Pressure
Heat sinks and radiators benefit from fans with high static pressure. The S8038-10K has a static pressure of 51 mmH₂O, which enables it to push air, even through narrow cooling fins. At the same time, it achieves a maximum airflow of 173.30 m³/h allowing it to quickly dissipate heat from enclosures. These properties make it the ideal choice for a wide range of applications.
Flexible Connection Options
With its standard 4-pin fan connector, the S8038-10K can also be connected to 2-pin or 3-pin sockets, and then be controlled by voltage. The 30 cm cable allows a lot of flexibility in positioning.
Active Cooling for Extended Motor Lifespan
The lifespan of fans is mostly determined by the lifespan of the motor, which is significantly dependent on the motor temperature, especially in long-term operation. The motor of the S8038-10K is actively cooled by an additional impeller in the fan hub. By maintaining lower motor temperatures, its lifespan is extended by up to 50 %. This advance not only leads to improved operating efficiency, but also to significant cost savings in the long run.
Wide Range of Applications
The S8038-10K fits into 2U server cases and serves as an upgrade or replacement for a CPU fan, radiator fan or for system ventilation. In addition to server cooling, it is also used in industrial systems and plays an important role in machine control and automation systems. Reliable and robust, it assures performance in various hardware environments and ensures efficient cooling and minimal downtime.
Technical Specifications
General Specifications
Fan Speed: 500–10000 rpm
Airflow: 102 cfm | 173.30 m³/h
Speed Control: Pulse Width Modulation – PWM
Static Pressure: 51 mmH₂O
Fan
Fan Frame: Standard
Connector: 2510 4-Pin Fan-Connector
Fan Bearing: Dual Ball Bearing
Operating Ambient Temperature: -10~70 °C
Electric Characteristics
Starting Voltage: 5.8 V
Current | Voltage: 1.3 A | 12.0 V DC
Cable Length: 300 mm
Size & Weight
- Length: 80 mm
- Width: 80 mm
- Height: 38 mm
- Weight: 151 g
Joshua
Reviewed in the United States on April 10, 2025
These fans pack a huge punch. They can move a lot of air. I replaced some fans with these in my build. At first I had them on max and with all four, it sounded like it was about to take off. I tweaked some of the pwm settings and they haven’t been that loud again. The price is in the sweet spot for me.These definitely helped with my cooling problem and were easy to install
Adry
Reviewed in Italy on May 6, 2024
buon prodottolo consiglio
CG
Reviewed in the United States on February 14, 2024
These fans are definitely better than I expected. The noise and power curve at the ear and wall are far better than many 80x38mm alternatives. I’ve been on the hunt for a high static pressure solution in this size range and these fans seem to be the best I’ve come across to date. Oh! They’re also surprisingly light. I’ll be coming back for dozens more in the next few weeks.
James R. Norton
Reviewed in the United States on December 3, 2024
I purchased these in lieu of 92mm case fans because the pc case is small. I installed two of the four fans I purchased but was immediately disappointed at the high level of noise. Research indicated that high speed fans are noisy but the noise level could be adjusted by lowering the rpm (PWM fans). I lowered the rpm by 50% but the noise level was still too high. I decided to return these fans and purchase the 92mm case fans which are more expensive.
Martin
Reviewed in Germany on November 28, 2024
Ich habe mir diese Lüfter für meinen Eigenbau einer Absaugung für den Gravurlaser gekauft wo ich 2 Stk eingebaut habe und für das das sie nur 12 V 1,6A brauchen saugen die Ordentlich was weg.Tolle Leistung, zu top Preis.
Joseph
Reviewed in Germany on January 20, 2024
Decent server-class performance, relatively quiet, works great for quieting down servers. Now if Arctic could include a splicing kit people wouldn’t need to get creative with the crimper in case of non-standard fan headers…
Recommended Products
$23.39
$ 9 .99 $9.99
$44.95
$ 20 .99 $20.99