Your cart is empty.
Your cart is empty.Product Description
Daniel Lavoie
Reviewed in Canada on February 2, 2025
good
Shawn Frazier
Reviewed in the United States on May 5, 2024
Ordered for a friend's wifi pool monitoring system. They were an exact fit to replace his old broken antennas.
S. Moiseev
Reviewed in Canada on November 3, 2023
Antenna leads were sufficiently long to attach to the motherboard-mounted WiFi M2 card.Already had the holes in the case panel to attache the external antennae mounts.All took about 10 minutes to install and mount.The most challenging part had been attaching the leads to the WiFi card due to micro-sized connectors.
codo
Reviewed in Canada on May 19, 2022
I bought these to pair with an Intel 9260 card to extend the bluetooth range on my desktop, when playing games in the living room across the hall. Have the intended result, however you should be careful when installing them as they didn't want to play nice with my IO shield for my board. They are hanging a bit loosely but working fine.
Angela Patterson
Reviewed in Canada on October 17, 2022
Works pretty well with Intel 8265NGW wifi modules.The inside cable is very thin and feels fragile. You feel like you could snap the end easily when trying to attach it (thankfully mine did not).The exterior antenna is a bit rough to turn on the plug but it will attach. All in all, it does the job.
Jonathan C.
Reviewed in Canada on January 30, 2022
Received this (part code X002MCD1RT) kit with the 2 wire connectors and 2 antennas.The problem is that the M2 connector side is 1) very small and 2) would not click into the Intel Wifi car'ds connector.I looked at it under a microscope and noted the centre female connector was bent/damaged. Rather than sending it back; I took a thumb tack and "pressed" in the centre (wiggling action so that it made the centre area/pin hole a bit bigger/recreated it).Then when I went to connect it ; it "clicked properly".Make sure it clicks, otherwise it may disconnect / be loose.This was made possible by previous reviewers that said it could click except for the 1 negative review. where it couldn't make a solid connection. ALso, I secured the antenna ends to some holes in the sheet metal of my case so I didn't need a PCI metal adapter/mount.Hope this helps the next person.
Recommended Products