Your cart is empty.
Your cart is empty.Key Features: Telemetry data can be displayed on the transmitter screen, or for parameters where users only want to be notified when a defined threshold is exceeded, (battery voltage, ESC temperature, etc.), a configured vibration or sound alert from the radio can be utilized. There is no requirement for additional Telemetry Sensors to be purchased when using the Castle Telemetry Link. There are up to 7 specific data points available (varies with ESC) and users can enable/disable data points through Castle Link. Overview: In this day and age, we all know R/C is not just one way communication anymore. Telemetry advancements are rapidly emerging and Castle has collaborated with the radio experts at Spektrum to bring to market an incredibly useful and easy to use Telemetry product. Air enthusiasts now have a means to receive and view telemetry data on compatible Spektrum radios when using their favorite Castle ESC's. Needed To Complete: Compatible Spektrum radios (DX6 G2, DX7 G2, DX8 G2, DX9, DX10T, DX18, DX18 G2, DX18 Stealth, DX18QQ) that support X-BUS protocol with AirWare software released after May 21, 2014. It is also necessary to utilize a compatible Spektrum Telemetry Module (TM1000 or AR7350 or AR9350) The Castle ESC must have the ability to accept a bidirectional communication protocol that gives it the ability to transmit real-time telemetry feedback. This feature is called Link Live and needs to be enabled on compatible ESC's using Castle Link
Henk Heath
Reviewed in the United States on February 16, 2023
Really quick delivery allowing me to monitor the head speed of the helicopter.
Jayme
Reviewed in the United States on August 24, 2021
Easy to use and setup. Provides reliable telemetry data for Spektrum transmitter users. Will buy again and again and again.
kevin
Reviewed in the United States on December 31, 2021
installed between a mamba monster x esc and spektrum 6100 reciever, changed a few settings on my spektrum dx5c and that was all it took! live temp, rpm, voltage for bec, esc & packs, even calculates your speed based off the rpms & roll out.I was very skepticle if this was really going to work right, or work at all but with a simple install & small enough to fit in a traxxas reciever box and finally castle has live data without spending hundreds to get a futaba. only downside I would point out is the castle B Link had to be removed so to change the castle esc settings now I have to plug in my computer using the link, but as far as getting the live data its great
Dustin Martin
Reviewed in the United States on November 23, 2021
I purchased this to install in line with my Castle Creations XLX2 and 800 kV motor combo and my Spektrum SR6110AT receiver. Unfortunately I’m not really getting any telemetry on my Spektrum DX5C transmitter.I did go into the XLX2 configuration and change Live Link to on and the lights are blinking on the telemetry sensor.I’ll change the stars to five once I figure it out and if I ever get telemetry.
Customer
Reviewed in the United States on November 6, 2020
It works
Recommended Products
