Your cart is empty.
Your cart is empty.CVLIFE sporting optics mounts rings are crafted from 7075 aerospace-grade aluminum, embodying strength and reliability to ensure steadiness and security in every scenario. Featuring a III-type hard-anodized matte black finish, these mounting rings are resistant to wear and corrosion. Equipped with integral recoil stops, these rings firmly clamp onto rails, providing added stability. Precision grinding minimizes circular and coaxial errors, ensuring higher overall accuracy. Ideal alignment keeps the scope securely in place.
DFinn
Reviewed in the United States on May 6, 2025
They're okay. They hold together. Just don't put it through anything strenuous, or it falls apart.
Joe o.
Reviewed in the United States on May 12, 2025
I mounted these rings on my Bergara B14 HMR paired with a 30mm scope, and the setup has been flawless so far. The 7075 aluminum construction gives noticeably more strength compared to typical 6061 rings, which matters when you're dealing with a precision rifle like the B14. They’re lightweight but feel incredibly rigid, and I haven’t seen any flex or shift under recoil.Installation was smooth. The clamping surfaces are well-machined, and the T15 Torx screws seat down cleanly and evenly. With three screws per side, the scope is completely secure, and the built-in recoil lugs make a big difference. Even after multiple range trips and dialing for elevation repeatedly, the scope hasn’t budged or lost zero.The Type III hard anodized finish is also holding up well, even after some rough transport and outdoor use. It resists scratches better than expected, which is great if you’re out in the field or running matches.These rings complement the precision and build quality of the B14 HMR. If you’re looking for a high-strength, no-compromise mounting solution, these are a smart choice. They give you confidence that your scope will stay locked in, no matter what conditions you’re shooting in.
J. Todd
Reviewed in the United States on April 28, 2025
I have used a lot of different scope rings over my 58 years, and these may be the best value priced rings I have ever owned. When I say value I don't mean to imply cheaply made because these are definitely not cheaply made. The fit and finish are impeccable rivaling mounts that I have paid much more for. There is also a lot of attention that has been given to details and quality of life improvements. Things like all of the edges being radiused so there are no sharp edges, and the fact that there are no tooling marks that I can find speaks to the quality of manufacturing. High quality torx head screws rather than allen key screws, and a solid recoil lug made to fit Picatinny rails, torque specifications marked directly on the rings... these are just some of the standout features that bely the price. I have tried other value priced rings that I wouldn't recommend for anything more than a pellet rifle, but I wouldn't hesitate to use these on just about any rifle I have other than my high end safe queens. They line up straight and true, hold a scope very secure, and look good doing it, all at a value conscious price, what else could you want from them.
Marcos Barroso
Reviewed in the United States on April 25, 2025
great scope rings, i wish they made for normal 20mm scope.
Wildlife/sports photographer
Reviewed in the United States on April 19, 2025
Well made scope rings for a scope with a 30mm main tube. They are the perfect height for a scope with a 44mm front objective, leaving the bottom of the objective about an eighth of an inch above the picatinny rail on an AR platform rifle with free floated barrel and full length rail on the hand guard. The rings are machined extremely well and did not need to be lapped. The hard-anodized finish was very well done and seemed of better quality than on rings that I paid 4 or 5 times the price of these rings. I like the fact that the torque recommendations are etched on the scope rings and that the screws are torx rather than hex. It came with 5 extra screws and a torx wrench, however a torque wrench should always be used when mounting a scope. These rings are a bargain at the Amazon price!
Mr. Chianti
Reviewed in the United States on April 17, 2025
I'll preface this by saying I am only getting products via the Vine program that I'll use myself and intend to keep. I don't need a lot of dollar store items around. Life's too short, eh? I tend toward things made of metals. I was a machinist for years and still enjoy the feel of well made items.These are square, straight and true with no tooling marks.The above said these are made well. Usually if we get say curtain brackets that are made in China I'll immediately toss the hardware. It just doesn't meet the standard of me and my tools.These arrived with well fitted Torx cap screws, a base that fits properly on a picatinny rail and imprinted torque values for the base to rail and scope caps themselves. That's a nice touch. There's a little bag with a Torx tool and spare cap screws.I've torqued things for many years and stripped a few. Be careful, it's only aluminum! I've learned over the years what proper torque is by finger, hand, wrist, forearm and arm pressure produces. But I still use a torque wrench when needed. A great way to learn torque for apprentices and new to fixin' things is to gently clamp a full size torque wrench into vise jaws and pull and read the different values. Your arms should learn the muscle strength for various levels of torque. Rant over.I recommend a Wheeler brand torque screwdriver (available on the 'Zon) if you need better guidance. They also make a great scope leveling tool. There are less expensive kits but Wheeler makes a well thought out product.I'll use these on an older Mauser that was sporterized. I'm sure these will stand up to the 8mm recoils. Good luck!
Zenos
Reviewed in the United States on April 17, 2025
These scope brings are excellent economical scope rings for a 30 mm scope. I have mounted them on a lever action 44 magnum and they were just right for my 30 mm Bushnell scope. They are made out of 7075 which is much harder than 6000 serious aluminum. They have quality screws and my scope lading it just right with no need to wiggle it around the alignment was perfect. I had the medium ones and they work great on a 44 mm scope. His ringtone excellent value for the money and will work well. If I was installing a 2500 scope on a large magnum rifle I would buy more expensive rings but for a low recoil gun these will work excellent. The Finish is nice the radius brake on the edges is nice and the printing to tell you how tight to torque the screws is excellent and readable. Overall excellent economy scope rings.
Recommended Products
