Your cart is empty.
Your cart is empty.FelPro Performance Gaskets deliver reliable sealing under grueling racing conditions
Cesar
Reviewed in the United States on March 26, 2025
DO NOT WASTE YOUR MONEY ON ANYTHING ELSE!!!! Went in circles buying the cheap steel core stuff only for my poor 350sbc to be leaking oil like crazy. Think of these gaskets as an investment. Would’ve saved money if I had just bought from the beginning.***FAIR WARNING YOU WILL NEED LONGER BOLTS IF YOU HAVE SHORT ONES***I used the classic looking T/V bar valve cover bolts.
Monte
Reviewed in the United States on March 25, 2025
Good quality, not flimsy!
Skyler Douglas
Reviewed in the United States on January 25, 2025
Great valve covers! High quality! I use them on all my race motors and never have a problem with them leaking. I typically take the valve covers off pretty often and reuse the same valve covers. They last for a very long time! Highly recommend for your engine.
Customer
Reviewed in the United States on April 25, 2025
Worked great for my SBC 383 stroker with aluminum heads, my old gaskets were cork and leaked like crazy, these are nice gaskets and look to be reusable.
Scott Dankbar
Reviewed in the United States on April 18, 2025
Great reusable gaskets with no sealer needed
EricOnline
Reviewed in Canada on July 7, 2024
I’ve always had trouble keeping my valve covers from leaking. Sometimes confused it by appearing to be a rear main seal leak by oil dripping from the bell housing. Tried a lot of different rubber gaskets with limited success. I use Edelbrock heads which don’t have a lot of contact area around the back lower corners and always have oil pooled inside the rear corners up to the gasket which doesn’t help. I tried the perma plus gaskets before thinking they were the same as these but they are not. The perma plus are black rubber with steel core where these are thicker and made of silicone with steel which is more pliable. I paid the extra $$ this time and have finally eliminated all leaks. I torqued the bolts to 3 ft/lbs and didn’t retorque after running.
Cat
Reviewed in the United States on November 7, 2024
Fixing up and replacing part in my Buick, these fit nicely! Thank you.
jonathan cherrie
Reviewed in the United Kingdom on November 2, 2024
Its felpro the brand says it all.
Blzbro
Reviewed in the United States on October 15, 2024
Put these on my SBC, no leaks from the valve covers anymore. Thanks!
stephen winter
Reviewed in the United States on October 12, 2024
You get what you pay for. These are nice!
Cameron :-)
Reviewed in Canada on September 10, 2021
These are amazing gaskets because they keep the pressure firm around the perimeter so that you'll have no leaks. Also, the material does not soak up the oil like my old gaskets; with a sealer, my old gaskets still leaked! You'll pay more for these but you'll be happy they don't leak since this solves the problem of the perimeter design being prone to leaks.
MPenner
Reviewed in Canada on January 2, 2021
Not cheap but they are reusable and fit perfectly. Put them on a chev 350 and no leaks - these engines are notorious for leaking valve covers. Would recommend.
R&B Racing
Reviewed in Canada on August 18, 2017
I have tried many other valve cover gaskets and alway would leak oil . These felpro 1628 are the best valve cover gaskets . Yes they are pricey buy trust me they are worth every penny. All the felpro blue gaskets are great . It's the only gaskets I will ever buy.
Recommended Products
$32.00
$ 14 .99 $14.99