Your cart is empty.
Your cart is empty.
Specification:
Condition: Brand New
Item Type: Fish Isolation Box
Material: Acrylic
Color: Transparent
Optional Size: A, B, C
A Assembly Size(L*W*H): 10*9.8*10cm/3.94*3.86*3.94inch(Approx.)
B Assembly Size(L*W*H): 20*9.8*10cm/7.87*3.86*3.94inch(Approx.)
C Assembly Size(L*W*H): 30*9.8*10cm/11.81**3.86*3.94inch(Approx.)
Package Included:
1 * Fish Isolation Box
Notice:
1. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3. You need to assemble it yourself after purchase.
Placeholder
Reviewed in the United States on August 26, 2023
Great box but instructions were a little confusing
Iramraph
Reviewed in the United States on March 23, 2023
Missing parts, no manual and not eligble for return or replacement. This is trash
J.B.
Reviewed in the United States on March 24, 2022
OK, this thing comes with no instructions and can be a pain to put together if you just go at it randomly. If you do it the following way though it's not bad. Take off all the protective coverings first:1. Attach left side panel to front panel and secure with bolster/screw/nut (see pictures in listing)2. Repeat for right side panel (be sure the flared part of the side panels that has the opening for the lid face the back)3. Fit bottom panel into the above.4. Add back panel and secure with bolster/screw/nut on one side only.5. Fit in internal dividers as desired.6. Secure other side of back panel with bolster/screw/nut and it should be solidly assembled7. Before fully tightening all the screws put top on if desired.8. Screw in hangers to the back and suction cups. (Note there are two screws longer than the rest and they're the ones to tighten it to the tank rim)Should only take 5-10 minutes total and no glue is needed.What I don't like about this product is the screws stick into the inter box fairly significantly and the pictures don't show that. I foresee this not being easy to clean once algae starts building up. Also, the internal separators can't be taken out easily; you have to partially undo the assembly. Something like the Eshopps Tanklimate is way better but also costs way more. I'm also concerned what the water flow will actually be like through the tiny openings. I was going to put some anemones in here but I don't think they're going to get enough water flow. The front and back panels have no openings for flow. The sides and bottom do but it's very narrow slits; small circular openings would be better for flow.Update: I'm taking off one more star because the suction cups don't work.
Tommy Dufour
Reviewed in the United States on April 13, 2022
Just got this in and first there were 2 back pieces and no front piece. Second when putting in together everything is loose and the lid will fall off with the slightest jiggle. I fixed this by gluing all the pieces together. Doing it again I’d pay a little more for something better constructed.
Bw
Reviewed in the United States on May 30, 2021
It came with no instructions. It came disassembled and if you’re not careful you break some of the plastic tabs and then you’re left with an unusable item. You face to put on your thinking cap for assembling it. I did break a little tab, but it still worked because I was careful with the rest of them. I would shell out more money for something of a higher quality. This just wasn’t it.
Halen Virgin
Reviewed in the United States on February 28, 2021
Product is very fragile on its own and will likely not stay assembled without some sort of water/aquarium safe glue. I used superglue and 100% silicone aquarium sealant to ensure it stayed together. I used it for my aquarium bamboo.
Indiana boat builder
Reviewed in the United States on December 3, 2021
This is a set of clear acrylic parts cut on a CNC machine. Everything fits nicely and is fastened with the acrylic tabs and screws provided. The only tool needed is a philips screwdriver. The first step is to remove the protective film from all the pieces. Then lay them all out to determine the bottom, sides and top. put the edge tabs in the slots to make the basic box. A rubber band can be used to hold it together while the screws are added. There is no need for glue once all is tight. It is a good idea to pay attention to how the top opens, otherwise you may accidently put the ends on backwards. If you do, It is no big deal to flip the ends around.
Deanne
Reviewed in the United States on April 24, 2021
This arrives with NO directions. Seems like it would be easy to put together, but it is NOT. Does not hold together unless you use something like glue or duct tape, neither of which can be put in a tank.
Recommended Products
