Your cart is empty.
Your cart is empty. Features:
100% brand new.
Channels: 6channels.
Modulation Type: 2.4G.
Modulation: GFSK.
Difference Frequency: No.
Frequency: 2.4G.
Power: 5V DC(4x 1.5V AAA, not included) .
Package List:
FlySky receiver FS-R6B X 1
Frederick
Reviewed in the United States on February 1, 2019
I have only bench tested for my Flysky FS radio. Works for a range test for this budget radio set-up. I would purchase again.
Elgin
Reviewed in the United States on September 10, 2018
I have 8 of these and they all work fine. I had one FS-TH9X transmitter go bad, but no receivers, even after crashes
taylor budd
Reviewed in the United States on October 15, 2017
Got it to work with the i6 transmitter finally by turning AFHDS 2 off as the r6b only works with the older AFHDS .When I say it works I mean its barely functional.Range issues. Brown out issues. The last time I used it, it shut off all signal and nose dived 60 mph into the ground.I took the case off and put it on my old bare reciever that works.Lame
D. Shauger
Reviewed in the United States on December 16, 2016
Not sure about this one. It works great on the ground and when doing a range check but in the air it seems to lose connectivity. It will cut out and you have no control over your plane. This has caused several crashes so now I do not trust the receiver.
W.
Reviewed in the United States on October 10, 2016
This is a very good receiver and has excellent range. I have long been a fan of JR and Futaba radios and decided to up date out of the switching crystals stone age and go to 2.4gHz. I explored the offerings and found a 6ch FlySky i6 for $40. I love it's small size and feel. The range is great and the receivers can be had for a few dollars vs the $60 plus for many other brands. I recommend this system for a cost effective way to get into 2.4gHz interference free automatic frequency hopping digital RC flying.
Tim N of the Pacific Northwest
Reviewed in the United States on May 27, 2015
This light and compact receiver matches up perfectly with my FlySky FS-T6 transmitter. Would be nice if they would label the pins. The outer-most pin happens to be the negative (-) pin. I got this to go in a 2nd scratch-built plane. Will buy more, as I scratch-build more planes.
G-Man
Reviewed in the United States on March 29, 2014
I purchased this unit to convert my FM electronics to 2.4 GHz. Works great with the Sky-fly FT-6.Here is some important info that I had trouble finding:I just downloaded the manual from [...] The manual's channel order is as follows:Aircraft:1- Ailerons, 2- Elevator, 3- ESC /Motor, 4- Rudder, 6- Optional flaps or dual aileronsHelicopter: 4- Rudder, 5- Gyro sensitivityAlso the battery pack should be : 4.5-6.5VI hope this helps someone.
S. B.
Reviewed in the United States on February 11, 2014
This receiver also binds and works with Hobby King 4-channel HK-T4Av2 and 6-channel HK-T6Av2 transmitters. I tested it with these transmitters I have and I encountered no problems or issues. Binds easily.
Recommended Products
