Your cart is empty.
Your cart is empty.Revo 4wd Ssd Cv Drive Steel optional upgrade heavy duty splined star drive CVD axle kit for the front or rear of the NEW 1/10th scale E-Revo, E/MAXX, Revo 3.3, T/MAXX 3.3, and Summit. These shafts are compatible with vehicles that use the 5451X axle shafts. Please confirm that the vehicle uses these shafts before ordering. FEATURES: - Heavy duty CNC machined #45 hardened carbon steel construction - Replaces factory plastic front or rear drive axles - Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement - Design eliminates CV pin setscrew - Steel is black finished YOU WILL RECEIVE: - Two (2) splined CVD shaft assemblies REQUIREMENTS: - Installation at rear drive assembly - Recommended to maintain CV joint and shaft spline with grease - Recommended to use a removable-type locking adhesive on screws threading into metal SPECIFICATIONS: - Approximate collapsed length: 151mm (5.9 inch) - Approximate full extension resulting in zero shaft engagement: 199mm (7.8 inch) COMMENTS: - Replaces factory plastic 5451X axle driveshaft assembly
Mr. I. B. Testing
Reviewed in the United States on May 8, 2024
Very heavy duty axles .....definitely stronger than stock
Nathan Hawkins
Reviewed in the United States on September 7, 2023
The cup that fits to the output of the front diff is not keyed like factory so the only thing transmitting power is the pin. Installed with little issue but broke within minutes. The threaded portion on the outboard side snapped off leaving the hub very little to hold on to.
Marc
Reviewed in the United States on March 12, 2023
Seemed very well built but 5 minutes in broke right at the set screw hole.
Robert McKeever II
Reviewed in the United States on December 17, 2023
I ordered a set of these for the rear end of my Revo thinking they'd be stronger than the 5451X that Traxxas makes. This would be the second set that I broke. The car somehow hooked up on wet pavement and it snaps the ends every time. I wouldn't recommend these for high power applications. Use the stock axles that you can get from Traxxas. The seem to be made better for the end where the tires mount.The other issue I have with these, is the end that mounts to the diff is a whole circle on the axle where the diff ends are keyed. The causes stress to the diff end because there's a ton of open space for the pin to twist and break off the diff. I broke a solid diff in the rear end with these because of this.Switching to a tool steel or something much stronger would be better and keying the ends that go to the diff would fix the issues.
Simpson
Reviewed in the United States on October 31, 2023
Very strong
Renaldo James
Reviewed in the United States on February 10, 2021
I love the product! It showed up same day and I ordered it at 2:15am!!! Better than what I can find locally! After my scam nightmares with shipping, AMAZON IS THE WAY TO GO!!!!
Jodi
Reviewed in the United States on January 22, 2021
Bought these to replace the rear wheel shafts on a E-Revo running a CC Sidewinder 8 and HPI Flux 2200KV motor. The motor pumps and these shafts translate it to the wheels. They're all happy with each others performance so far. I don't anticipate any problems in the near term.
Darryl M
Reviewed in Canada on March 24, 2020
couldnt wait to install them when they arrived. look very strong
Mathieu
Reviewed in Canada on September 9, 2019
J'en ai commandé 4 et 1 des quatre était défectueux. Le vendeur a rapidement fait les démarches pour m'en envoyer un de remplacement. Très bon service et bon produit!
Kyle M.
Reviewed in the United States on November 18, 2019
Works great for the Maxx, not intended for it but was able to make them fit with a dremel, complete upgrade over stoc and handles 4S power easily.
Benoît
Reviewed in Canada on August 18, 2018
Parfait A+++++
Jonathan Larente
Reviewed in Canada on August 25, 2017
Awesome product great if u are trying to strengthen your driveline especially if u have a mamba and a Robinson clutch asm this is a must in your 1/10 scale trucks
Recommended Products
