Your cart is empty.
Your cart is empty.Build the most versatile sled in your shop, FAST. Many table saw sleds have only one function, and factory miter gauges have a limited range of angles. With its unique grid layout of dovetail grooves, this sled is fully adjustable to cut any size stock at any angle. We’ve combined the ease and accuracy of the ZEROPLAY Miter Bar system with the versatility of the all-new MATCHFIT Dovetail Hardware. Everything you need to build the most versatile sled in your shop, fast. Speed and Precision Using the ZEROPLAY Miter Bar’s ONE-TOUCH CALIBRATION, you instantly fill the full width of the miter slot for no side-to-side play. Its top-down installation allows you to square your sled to the blade in a snap. 360 Degrees of Adjustability The unique grid layout of dovetail grooves allows you to set your fence at any angle, and lock it in place with the included MATCHFIT Dovetail Hardware. No matter the angle of your cut, the ZEROPLAY Miter Bar keeps the sled running parallel to the blade at all times. Everything But The Wood This sled is incredibly easy to build. All you need is some plywood, a ½” 14-degree dovetail router bit, and about an hour. The package includes detailed and easy to follow plans that will help you build the most versatile sled in your workshop. What's in the Package: (1) ZEROPLAY Miter Bar (Single Bar)(1) ZEROPLAY Miter Bar Instructions(1) MATCHFIT 1-1/2” Dovetail Track Screw Hardware (4x 10-32 1-1/2 Track Screws, 4x 10-32 Wing Knobs)(1) Illustrated 360 Sled and Fence Plans
Skid
Reviewed in the United States on January 7, 2025
Worked great. Smooth sledding ever since!
Dean Moore
Reviewed in the United States on November 26, 2024
once sled was made, using table saw was much easier. not hard to follow instructions.
Joe
Reviewed in the United States on August 11, 2021
I am generally skeptical of new inventions, but I gave this a try. I was attracted to the zero-play feature, as my shop is in the garage and subject to lot of moisture and temperature swings. This product has worked great. The instructions aren't great, but to some degree it's pretty intuitive.
karl savage
Reviewed in the United States on April 6, 2021
I thought this would be good for my cheap table saw but it didn't fit ... my mistake I didn't fully read the info before buying ..
seewhyman
Reviewed in the United States on May 4, 2020
I didn't notice the size of the bar (nor did I know the size of my miter slots) when I ordered this. So I am sending this back and replacing it with the kit without the bar. The product is awesome and works great, even though I needed to make my own track (or buy a different one from someone else).
Alex K.
Reviewed in the United States on October 18, 2020
Very comprehensive kit. First thing I built after building my router plate insert for my table saw extension. Haven’t used it for any project yet but saw the value in having it to complement my table saw and crosscut sled.
Dulcimer Dave
Reviewed in the United States on January 21, 2020
The idea of having a sliding sled to make difficult and accurate cuts on a table saw is very appealing. What you get with this kit in my opinion is minimal for the cost. You have to make the sled itself which requires a degree of skill. The dovetail slots you cut, according to the directions, say can be done with a standard dovetail cutter. That is true but Zeroplay makes a modified cutter for about $25.00 that would likely fit the sliding plastic pieces better. The plastic piece that is adjustable to fit your miter slot is not that long. Adding a second one would be better. I could not get the fence and stop tight enough to prevent them from slipping. To solve the problem, I added self-adhesive sandpaper to both pieces. They now work well. Again in my opinion, a experienced woodworker could make their own sled and use a manufactured miter bar or shop made. Then use a t-slot cutter with carriage bolts with plastic knobs or wing nuts.
J. Straw
Reviewed in the United States on November 15, 2019
The Zeroplay 360 Sled Kit is a good product; I am happy with my new sled. The design is good for rips, cross-cuts, and miters on relatively short boards. I had hoped to be able to make three- or four-foot long bevel rips too, but the single miter bar does not stay in my saw's miter slot long enough. I ordered an additional Zeroplay miter bar to install behind the current bar, extending the capacity and strengthening angular rigidity of the sled.
Recommended Products
