Your cart is empty.
Your cart is empty.Product Description
Penguin Pottery’s glazes offer a huge range of effects to choose from: vivid, bright, smooth, glossy, textured, satin, matte; opaque, semi-opaque, semi-translucent, translucent, flowing, non-flowing.
Our low fire glazes are perfect for school projects, classrooms, studios, and potters who do not fire at high temperature. These low fire glazes are the potter’s choice when looking for a wide palette of colors, like celadon, lively reds, deep greens, bright blues.
Our mid fire glazes offer similar ranges but also introduce interesting effects and tonality not available in low fire glazes.
How to Get Great Results with Our Glazes
Mix Well Before Using
Sometimes glaze contents will settle. That's normal! Just like house paints, ceramic glazes need to be fully mixed to ensure smooth consistency. We recommend mixing well for at least 1-2 minutes.
Choose How to Apply
You can apply glazes either by (a) dipping your bisqued piece into the glaze or (b) brushing it on. Our glazes are ready to apply with a brush. If you're looking to dip, we recommend applying a dispersing agent like Darvan.
Remove Dust from Bisque
Removing all dust from your bisque-fired piece is critical to ensure a good outcome. Clean moist sponges are best. Make sure your piece is completely dry before glazing!
Fire Glaze to Correct Cone
Ceramic glazes are classified according to a temperature range ("cone") in three general groups: "low-fire," "mid-fire," and "high-fire." Over-firing will damage the piece/possibly the kiln, and under-firing will just give you ugly results.
A Note on the Art of Glazing Ceramics
One of the fascinating aspects of ceramics is the slight variations we can achieve by using different clay bodies, glaze types and firing methods. It's like vintage film photography - you don't know what it'll look like until you get it out of the kiln! Glazes will react differently (and look different) depending on several factors, including:
- The temperature at which they're fired: even small changes in temperature can lead to different outcomes.
- The clay body on which the glaze is applied: the same glaze will look different if applied to a darker vs. lighter clay.
- The speed at which your kiln reaches the target temperature.
- How much oxygen is in the kiln's atmosphere while firing.
That is why ceramics is an art! We recommend you experiment with different approaches and, most importantly, embrace the uncertainty. You will have a lot of fun seeing different results!
About Penguin Pottery
- Employee Owned and US-Based: our company was founded by and run by potters. We conscientiously manufacture our products in New Hampshire, USA. We love getting our hands dirty while we share our love for the ceramic arts!
- Our Mission & Impact: we founded Penguin Pottery in 2020 with a simple mission: to increase access to the ceramic arts, while doing so in an ecologically-responsible manner. To that end, we donate 1% of our sales to environmental groups working hard to protect our planet for future generations.
We Support Our Pottery Community
We Support Artists
CERF+ is the leading US non-profit organization providing emergency relief funds, educational programs, advocacy, and networking opportunities to safeguard artists' livelihoods nationwide.
B.Fish
Reviewed in the United States on May 23, 2024
The media could not be loaded.
Jeffrey Greathouse
Reviewed in the United States on May 14, 2024
Applied as directed and fired in our raku firing. 1900 degrees worked well. first firing was under and it bubbled and blistered, but the second was spot on 1900 and it came out great.
Barry Hammons
Reviewed in the United States on December 5, 2024
Sculpture is in kiln look forward to seeing how it works. I think you really need the three colts
Morgan
Reviewed in the United States on December 5, 2024
I followed the directions, mixed the glaze well, fired at cone 6, exposed to light and it still did not glow.
Recommended Products
$20.16
$ 8 .99 $8.99
$189.99
$ 86 .99 $86.99