Your cart is empty.
Your cart is empty.Features and Benefits V1015B is the ideal tool for picture frame and door assembly. V1015B is drives V-nails of size. 7,10, 12, 15mm; Diameter is 10.3mm. Specification Weight: 1.49kg/3.28lbs Dimension: 270x65x208(mm) Capacity: 200pcs Air pressure: 3.5-7kg/cm² Fitting tube: 6mm Fastener Range： V Nails 7mm to 15mm； Diameter 10.3mm； Thickness 0.3mm；height 4-4.1mm Packing Content 1 x Nailer with neccessory accessories Nails is not included but it can be purchased from us. Specification Weight: 1.49kg/3.28lbs Dimension: 270x65x208(mm) Capacity: 200pcs Air pressure: 3.5-7kg/cm² Fitting tube: 6mm
Izbus
Reviewed in the United States on January 25, 2025
For the most part, works well. Easily jams up, though. Fairly simple to take apart to clear the jam. Lubing the mechanisms help.
Mary Grady
Reviewed in the United States on January 19, 2025
It has been very useful. I do wish the guilds were better designed. The wing nutted stud loosens easily
Henry r.
Reviewed in the United States on September 21, 2024
It’s also junk. Does not have any safety trigger device. Instructions are not correct on use. Does not work correctly. I really wish i had tried it when i got it
philip kim
Reviewed in the United States on April 20, 2024
Very good.
SJA
Reviewed in the United States on June 14, 2023
I have used this for the first time since I received the gun. It works as described but I did get a couple of jams as other reviewers have stated. One thing that helps eliminate this is to add a very small amount of pneumatic lube oil in both air intake end (1 drop) as well as into the noose of the gun that engages the internal striker pin (less than 1 drop) that seemed to ensure the mechanism operation is smooth. Also, depending on the type of wood may also affect how well the nail is set. You need to have at least 75 psi from you tank. As I continue to used the nailer for other frame builds, I will supplement this review!Update as of 11/24/2023. The V-Nailer continues to work very well. Another suggestion is to insert the v-nails properly. In Spite of some of the writings, there is a sharp side to the nail. That side needs to be put top side the gun that will penetrate the wood. In the 6 months of using the gun, it has performed very well. Again add a drop of oil to the air inlet and the striker nose.
Customer
Reviewed in the United States on December 8, 2023
Helped a lot with redoing a trim around the windows and doors.
Youbetcha
Reviewed in the United States on November 28, 2023
It worked for a little over 7 months. Now it jams every time and no product support. The manual says that if it's not working, "entrust" it to the shop where you bought it. Good luck with that!!
jdecker1978
Reviewed in the United States on June 10, 2021
I was skeptical to buy this after reading some of the poor reviews. But I have a lot of experience with pneumatic tools and thought maybe some of the problems were user error.I own a photo printing company and do a large amount of canvas's stretched over stretcher bars, which I construct myself. I've been wanting to move from 1/4" stapes to an underpinned for a long time, but they are incredibly expensive and take up a ton of space. So I decided to try this. A week and about 35 frames later I could not be happier. My production time has reduced significantly, the frames are now more precise, and the one aspect of my job I really did not like is actually now fun. I did have one jam about halfway through my first stick of nails, but it took less than 3 minutes to fix, and fine since. Totally fine for the price. Note this is the meite, not the gun pictured with Chinese writing. Also don't use the expensive nails the mite shop sells and amazon recommends. The frame pac nails work great and they are half the price!
Recommended Products
