Shopping Cart

Your cart is empty.

Your cart is empty.

Springfield Speaker 2.58' Subwoofer Coil Replacement Kit - Dual 4 Ohm - Compatible with Kicker L7 Subwoofers D4

Free shipping on orders over $29.99

$81.95

$ 37 .99 $37.99

In Stock

About this item

  • Aftermarket Coil Replacement kit compatible with Kicker L7 Solobaric (2.58 in D4 coil version ONLY). Different sized and ohms of coils are NOT interchangeable for this application. Hundreds sold, excellent results!
  • Includes all the spiders, adhesives, shims, and wires needed. You MUST reuse your original terminal plate, cone, and surround.
  • Kit shown in photo is an example, and may not be specific to this speaker
  • Step-by-step instructional video available online.


Springfield Speaker 2.58" Subwoofer Coil Replacement Kit - Recoil kit - Dual 4 Ohm - ONLY compatible with Kicker L7 12 inch or 15 inch Solobaric Subwoofers that used a 2.58 inch ID Dual 4 ohm coil from the factory. (2.38 inch ID and 1.96 inch ID versions also available in a different kit) Different sized and ohms of coils are NOT interchangeable for this application.
Kit shown in photo is an example, and may not be specific to this speaker.
COILS ARE MEASURED BY INNER DIAMETER!! THIS IS A CUSTOM KIT.
To most car audio guys, it is common knowledge that Stillwater Designs does not sell replacement parts or kits for their L7 Solobaric line of subwoofers. This is a custom kit that includes all the needed parts and adhesives to do your own custom coil replacement on your L7 Solobaric Subwoofer.
**NOTES** #1 - You MUST reuse your original terminal plate, cone, and surround.
#2 - Kit includes all the adhesives, shims, and wires needed.
#3 - This is NOT a drop-in kit - this is a professional kit.
#4 - Instructions are not included.
THIS IS A NOT A PRE-ASSEMBLED DROP-IN KIT.
Kit includes:
1 - Heavy-duty 2.58 in ID dual 4 Ohm voice coil custom-wound on black aluminum former (upgrade from original kapton)
3 - Heavy-duty spiders (correctly-sized) Some verions use 1, some use 2
1 - 3.25 inch inverted dust cap (gray or black with no logo)
1 - Bottle of professional-grade CA Adhesive (for voice coil)
1 - Spray bottle of CA Adhesive Activator
1 - Tube of professional-grade clear-drying rubber speaker adhesive
8 - Large speaker shims (Note cards)
2 - Tin application brushes
2 Ft of lead wire rated up to 3500W peak (Sub will remain at factory rating)
2 Lengths of shrink tube for coating your new leads
THIS IS A NOT A PRE-ASSEMBLED DROP-IN KIT!


amanda
Reviewed in the United States on March 31, 2024
Started of rocky but got it put together sounds great
J Whitham
Reviewed in the United States on October 5, 2022
To start, the seller is amazing and very helpful though the shipping company damaged the package in transit... The seller responded immediately and got me the damaged part replacements very fast. The parts themselves are amazing though I needed more glue for my particular subwoofer and I also used a carbon fiber dustcap instead of the thin plastic one supplied but I'm 100% happy!
Joe walker
Reviewed in the United States on April 7, 2021
It went well I hope you have fun with your project like I did
Brandi N
Reviewed in the United States on January 7, 2019
Not for the faint hearted, took me awhile to get it all cleaned and prepped but IT WAS WORTH IT! Sub is brand new again. Thank you! Highly recommend for those DIY’er
Ben Harrison
Reviewed in the United States on May 28, 2016
Ok so those of you that are knowledgeable about subwoofers and kicker fans alike let me tell you that this is a great product. I had a kicker L3 15 with a blown voice coil. I took it apart to find out what size the coil was and was able to buy this one to replace it. It was easy but time consuming and the and result was a kicker L7. I love this product and encourage anyone how wants to fix their kicker.