Your cart is empty.
Your cart is empty.Product Description
7463 Small Adjustable Gland Nut Wrench
Why 7463 Adjustable Gland Nut Wrench is a must have tool?
- This is a must have tool if you are working on small hydraulic cylinders. Fits to gland nut from 1" to 3-3/4" in diameter
- 7463 gland wrench makes breaking down those small cylinders a snap, saving your a lot of time and energy!
- With the 1/2" breaker bar and it was easy to unscrew the tops of the cylinders. No more pounding your hands off with a sledge and a punch!
- Corrosion-resistant & Durable 42CrMo Steel construction with extreme anti-wear property.
- Specially designed to fit hydraulic cylinders on most farm and construction equipment. Repair tool for backhoe and other heavy equipment / farm machines / hydraulic machinery.
- Reversible pins are sized at 1/4 or 7/32" inch to accommodate most applications.
- Hydraulic brake spring remover/installer for use on 1984 thru current Ford 600, 700, and 800 series trucks with Lucas hydraulic brake systems.
- Fit hydraulic cylinders on agricultural loaders, compact tractor loaders, and skid steer loaders.
- Fits to gland nut from 1" to 3-3/4" in diameter
- Reversed to fit 1/4" or 7/32" inch diameter pinholes.
- Use with 1/2" drive ratchet
humberto leal
Reviewed in Mexico on March 9, 2025
Muy buenos
Jimmy Stephens
Reviewed in the United States on March 6, 2025
Worked great 👍
Trish Anderson
Reviewed in the United States on March 20, 2025
Worked great
wjjabnmp
Reviewed in the United States on March 19, 2025
Very cheaply made Chinese product. Item will not remove Kubota hydraulic cylinder end caps. The points are too big to fit in. I had to use a good old-fashioned pipe wrench.
Customer
Reviewed in Canada on April 8, 2025
Might get one job done, really irritating design. The pins are held in by small key screws, don’t hold up, ended up needing to hold the pins in place or they go flying off. It’s a two person job for sure, one to hold the tool on the end cap and another to turn the wrench. I ended up just using channel locks.
Rosemary Fuqua
Reviewed in the United States on April 11, 2025
Works great
RAYMOND F.
Reviewed in Mexico on September 7, 2024
Excelente compra
timothy w young
Reviewed in the United States on July 8, 2024
well made product but the pins were too small for my application so i was able to remove them and use hardened cobalt drill bits instead
Charles Whiting
Reviewed in the United States on May 12, 2024
This works great to take apart a 60hp mercury trim cylinder. The fixed position wrenches for this are very expensive. This worked great to take off the top cap as well as the lower shock piston that's torqed to 90 lbs. It's not the best quality. The arms don't lay flat and are crooked to each other, but it had no affect on what I was using it for. Saved me major money vs buying a specialized tool. Also if you want longer pins, you can take out the pins in came with and use the backs of drill bits as pins.
Jesse Nelson
Reviewed in the United States on October 10, 2024
Pins were too big for my tilt and trim , but I put them in a drill and used a grinder to make one end smaller , once they fit my application I was able to get the tilt caps off my force 125 cylinders with ease , heavy duty part and made a great tool for the task
RT
Reviewed in Canada on July 24, 2023
Good Value
Mechanic
Reviewed in Canada on May 2, 2023
GREAT!
Gabriel Jones
Reviewed in the United States on November 27, 2023
Spanner works. The small side is still a little too big for the application but I was able to make it work.
Recommended Products