Your cart is empty.
Your cart is empty. This ring set is for the serious shooter that wants the best in strength and ruggedness. The heavy duty rings are made of solid heat-treated aluminum alloy
* Fits Picatinny 1913 RIS rails.
* Works with 30 mm tube scope or 1inch tube scope using included size inserts
* 40mm center height(height from top of base to center of the ring). See-thru design.
* Ring width: 1inch (measured from front to back)
* Ring tops are held to base using 6 Torx screws (3 screws on each side)
* Each ring comes with additional top with built-in Picatinny accessory rail which can be used for mounting laser sight, flashlight etc...
* Large clamping Hex nut for secure mounting
* Anodized black matte finish
* TWO identical rings in the set with Allen head wrench (Picture shows one ring installed with accessory rail top which both rings have)
Jared James
Reviewed in the United States on February 10, 2015
Exactly what I was looking for. This are great rings for a great price. I needed some scope rings that would clear my flip up sights on my AR-15 and these fit the bill perfectly. I also like the additional picatinny rail spots on the top of the rings. However, when mine arrived, there was only one. No worries, I contacted the seller and they took care of it no questions.
Mitch Hutchinson
Reviewed in the United States on June 24, 2014
I received the product and put it away for a few days until after I had knee surgery. On the 20th after my surgery I got them out and immediately noticed that the screws were screwed all the way down and locked. The tops of the screw heads were scourged as if someone had returned them like that. It was almost impossible to get them undone, but I was able to do so. Once mounted on my rifle I could not get it to zero the balance with my Bushnell scope. So I sent them back for refund and ordered a different set of rings from Amazon.
Dan
Reviewed in the United States on May 10, 2014
I've purchased these rings before. The item this time has lost all it's previous quality. the mounting bolts are now produced with aluminum making them totally unreliable.The 6 torx screws for each ring are out of spec and are a real pain to attempt to tighten. in short the manufacturer has apparently changed to a "CHEAPER" company and it shows. In short I will know longer be shopping for these Items at Amazon and will probably be forced to buy American if they still manufacture.
MontanaMatt
Reviewed in the United States on February 22, 2014
Had purchased a set of these previously and they were adequate. Beefy build makes up some for the aluminum body. I liked the picatinny rail top for accessories. The second set arrived with no picatinny tops and were wrapped in taped up plastic. These appeared to be used. First set was good quality and has held up so far.( 5 stars) Second set was incomplete, poorly packaged and not in the original packing like the first set. (1 star) Average between two sets is 3 stars.
nittanylionlion
Reviewed in the United States on November 4, 2013
These mounts were perfect for my AR build. They went on easy, tightened the scope firmly without fear of binding the tube. Scope was at the correct height for eye alignment. The picatinny rail on top is perfect for spot or laser sight attachment. I recommended to a friend who purchased and he was pleased also. Very little field adjustment required.
George Harrell
Reviewed in the United States on April 11, 2013
I ultimately have no complaints with the product, it looks amazing, and I imagine that it probably is just as sturdy and awesome as they advertise is to be, however, it doesn't fit my scope mount. I didn't pay attention, and purchased these without consulting whether or not I had a Weaver rail or Picatinny. Just remember, Weaver locking slots are 0.180 inches wide, while Picatinny's are 0.206 inches wide, so they're not necessarily interchangeable. My own fault, but just a heads up to those looking to purchase without paying attention.
Ausie
Reviewed in the United States on August 16, 2012
good product, but the made in china sticker stands out on it like dogs nuts on a mouse! Its about time someone used torx drive capscrews on these because most all allen heads are badly made and between sizes.It is going to put your centerline of the scope at about 2.1 inches rather than 1.5 so go online and figure out your trajectories taking that into consideration or you'll go through rounds like wildfire and need a 6 foot target board to zero it.They have a good clamp and they mount level.The sleeves for the 1" scope tube might have to be clamped in with bluing ink and lapped a bit first if you want to get extravigant.All round, they held up to the recoil of a 300 winmag and mounted great to an American made Weaver rail so if you're going in at entry level they work well.If you want guaranteed accuracy and always rely on your boresight, then go with Millet or Leupold.See'ya.
Russ
Reviewed in the United States on December 7, 2012
I really liked these rings and they look great on my AR15. Nice option for the use of either the 1" or 30MM scopes as plan to upgrade the scope that I have now. The top rail works great for laser or flash light that I would only use once in a while. I subtracted one star because the rings are truly heavy duty that add weight to the rigle.
Recommended Products
