Your cart is empty.
Your cart is empty.From the manufacturer
WALKER CLAMPS
Complete your exhaust repair with Walker clamps. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life. Use Walker clamps when installing Walker catalytic converters, mufflers and pipe to keep connections sealed and avoid additional stress on exhaust components.
BAND CLAMPS
Walker band clamps provide superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe. Made from durable and robust material for long service life.
U-BOLT CLAMPS
Designed to ensure a tight, leak-resistant connection, Walker U-bolt clamps are manufactured from durable and robust material for long service life.
MEGA-CLAMP CLAMPS
Designed to seal muffler inlets, outlets, elbow joints and pipe, Walker MEGA-CLAMP clamps are manufactured from durable and robust aluminized steel or T-304 stainless steel for long service life.
V-BAND CLAMPS
Featuring a T-bolt latch and OE-style features for superior clamping and sealing, Walker V-band clamps are designed for use with flared connectors.
WHAT IS AN EXHAUST SYSTEM?
Vital for fuel economy and the environment, your vehicle’s exhaust system carries away harmful gases that are created during the combustion process. The exhaust system not only keeps dangerous gases like carbon monoxide, nitrogen oxides and hydrocarbons from entering the cabin but it also "cleans up" the gases before they are released into the environment. Here are the components of an exhaust system:
- Manifold/Manifold Converters
- Extension Pipe / Flex Pipe / Intermediate Pipe
- Catalytic Converters
- Oxygen (O2) Sensor Ports
- Isolators/Gaskets/Clamps
- Resonator Assemblies
- Mufflers/Muffler Assemblies
PREVENTING STRESS ON EXHAUST HANGERS
Installing new exhaust components without neutralizing the entire system can place unnecessary strain on the hangers and isolators, causing premature component failure or excessive noise and vibration inside the vehicle. To alleviate this tension, loosen all exhaust clamps and flange joints at operating temperature; reposition any affected components until isolators hang freely with no tension; and finish up by tightening all connections starting from the front of the vehicle.
HOW TO TORQUE FLANGES
Progressively tighten bolts on flanges to avoid exhaust system leaks, gasket & stud failure and premature system fatigue & failure. For example, if the nuts require 60-ft-lbs of torque, start by torquing all nuts to 20-ft-lbs, then 40-ft-lbs and finish at 60-ft-lbs. For Y-pipes secure both sides simultaneously, tightening in a rotating sequence between both pipes. For manifold converters, begin sequence in the middle & work evenly out between both sides.
HOW TO CHOOSE THE RIGHT CLAMP
Manufactured from premium steel, Walker clamps are available in multiple varieties of saddle, band and wire ring clamps. Selecting
the correct clamp style is critical for achieving desired levels of sealability, durability
and serviceability.
steve
Reviewed in the United States on March 6, 2024
Nothing
Kelly Daniele
Reviewed in the United States on November 14, 2024
Good quality, easy to use.
Gello
Reviewed in the United States on March 2, 2023
The clamps that came with my exhaust kit looked pretty cheap. I started torquing down the 1st one, and sure enough it broke before it was anywhere near tight enough. Having a good experience with walker lap clamps in the past, I ordered these, and they did the job. I was able to secure everything nice and tight with no issues.
Danny Beau
Reviewed in Canada on November 30, 2023
Get what you pay for. Best clamps period. Just like the quality Borla or stock ones and better than Pypes. 95 Mustang 5.0 l
Ajay Jain
Reviewed in the United States on May 30, 2022
Not a good product as it broke very easily. Bolt got broken while tightening and moreover its hard to fit socket as there is not much clearance. I will not recommend this clamp.
Citydragon
Reviewed in Canada on May 25, 2022
Works well, but overpriced
Andrew P.
Reviewed in Canada on August 23, 2021
Little pricey, but they work
Nazmudeen khan
Reviewed in Canada on October 21, 2021
Fits good
Bob F.
Reviewed in the United States on September 6, 2020
These provide a good all around seal, it's what most OE exhausts use if not welded. These are not like the $1.99 U bolt clamps that mainly squeeze the top and bottom leaving an indent in the pipe.
Customer
Reviewed in Canada on June 6, 2020
I will purchase again if needed.
Mike LasVegas
Reviewed in the United States on February 8, 2020
Good product overall. Workmanship is good, material seems to be sturdy. You MUST cut on four sides of the outer pipe going over the other pipe or it will not tighten as it should. Use an angle grinder or hacksaw just 3/4 the width of the band clamp.
The Wrench
Reviewed in the United States on October 9, 2020
was joining a 2 1/2 ID to a 2 1/2 OD - didn't crush outside pipe enough for a 100% seal
benjamin williamson
Reviewed in the United States on June 17, 2019
Works really well with my new exhaust. Wish I would have bought these before the U clamps (Air Leaked)Car sounds how it is supposed to now without the air leakage.Thanks
Recommended Products