Shopping Cart

Your cart is empty.

Your cart is empty.

RealTruck AMP Research BedStep | 75309-01A | Fits 2014 - 2021 Toyota Tundra

Free shipping on orders over $29.99

$289.99

$ 99 .00 $99.00

In Stock

About this item

  • FITMENT | Fits 2014 - 2021 Toyota Tundra
  • STRONG & RUGGED | Engineered to support loads up to 300 lbs
  • MAINTENANCE-FREE | Self-lubricating bushings for all-weather performance
  • HIGH-STRENGTH ALUMINUM ALLOY COMPONENTS | Precision stainless steel pivot pins for rock solid stability
  • WARRANTY | AMP Research stands behind its products with a hassle-free, comprehensive 5-year/60,000 mile warranty.
  • INSTALLATION | Includes all hardware necessary for installation. Product comes with easy to understand vehicle specific installation instructions. Be sure to read and precisely follow the provided instructions when installing.
  • 14-14 TUNDRA BEDSTEP


GO AHEAD AND STEP ON IT. BEDSTEP® IS A REAL TIME SAVER. Not to mention knee and back saver. Strong and rugged, this non-slip, retractable bumper step quickly flips down with the nudge of a foot providing a faster, easier and safer way to load or unload your pickup’s cargo. Supports up to 300 lbs. Frame mounts under the rear bumper so it works even with an open tailgate or when towing. Proudly made in the USA with global materials.


Tommy Lee
Reviewed in the United States on June 4, 2024
Step works great, there's a video on YouTube showing how to cut the factory bracket rather than taking the whole bumper apart to use the supplied bracket. Made the install a breeze.
Bishoy
Reviewed in the United States on March 4, 2024
I followed instructions to the letter, ended up breaking bumper plastic cover conectors, breaking the plastic cover, and scratching the trunk body while trying to remove the installated bracket, and still couldn't remove it. After 2 frustrating hours of trying to get the bracket out to replace it with the one provided in the kit, I finally gave up, and start looking this issue online.Needless to say, the only way to swap this bracket is to remove the entire rear bumper out, which is something I can't do on my own as it needs 2 people to lift it. Who's paying for my damaged plastic cover and scratched body? And how come a big company like this provides misleading installation manual?Other than that the product itself seems solid. 5 stars for product but 0 stars for instructions.
Paula
Reviewed in the United States on December 26, 2024
Makes it easier for me to get in the bed of my truck
NT
Reviewed in Canada on November 24, 2023
I installed this on a 2020 Tundra which took a bit of planning. First thing you should do is check that you have all of the parts. Mine was missing the bolt to attach the slim piece to my bumper support. It wasn't a huge issue as I had spare nuts and bolts laying around that I could use to finish the install.The step itself is a 5 star but the instructions and vagueness of it leaves a lot to be desired.Here are a few tips to save you some time and aggravation. First, do not take the bumper covers off. You won't need to do that if you have a Dremel or some sort of cut off tool that will fit in the install area. Recip saw is not great in the area as it will bounce around. Use eye and hearing protection. It is loud and there will be sparks and debris.1. Take the bracket included in the kit and trace the bottom portion on a cardboard box. Cut it out and tape it to the factory bracket. This will give you and outline of where to cut the stock bracket.2. Cut out the outline as best as you can from the template. You don't need to cut it exactly but you need to make sure the opening you cut is either the same size or bigger.3. Take out the bumper support bracket that's held together by two 10mm bolts and set them aside.4. Grab an impact wrench with 19mm socket and buzz out the two bolts required to bolt the step mechanism to the truck. A full sized impact likely won't fit so if you have a slimmer one, it will work just fine. I used my smaller DeWalt impact for this.5. Fill the rough edges you cut smooth. Be careful as the edges and burrs are sharp!6. Paint the cut metal to prevent corrosion.7. Install the step per the instructions with the bolts. You'll need to start the 19mm by hand and then finish it off with a ratchet that has an extension on it. I tried to fit my impact in there and was only able to reach the bolt that was closest to the cab. There was not enough room to get to the rearward bolt.8. Align the step as needed so it isn't sticking out the side. There are some tabs that gives you some adjustment options. Don't put those little metal tabs in until you are satisfied with the position because they like to fall out. Once you are satisfied, pop the tabs in and fasten them snug.9. Test out the step and enjoy it!
Kevin V.
Reviewed in the United States on April 13, 2023
This was a little tricky to install on my fairly new 2021 Tundra. It comes with a plate that you are to swap out with the existing plate that comes on the truck. I went to YouTube and found an easier way to install it. I installed it by cutting away a small area at the bottom of the existing bracket. YouTube has a very good video on how to do this and you will not regret it. Swapping the brackets is an all-day job and taking parts of your bumper apart that can be very difficult to do. Once you get passed the install the step is great. It works very well, and I love this thing. Just what I needed to get into the bed of my truck. Worth the money...
Noel Fleming
Reviewed in the United States on April 11, 2022
This is great addition to my 2018 Tundra. Definitely helps getting in and out of the truck bed. This is a very sturdy step with ease of use. The installation wasn't hard to follow, however unless you have pneumatic tools some bolts will not come loose with hand tools (keep in mind your truck was built by machines). Total time to install the step bumper was about 90 minutes with a friend though it can be done by 1 person.
W. Barnett
Reviewed in the United States on August 2, 2020
I bought this for my 2020 Toyota Tundra Limited. For anyone that says this was easy to install, I do not agree. I broke two of the tabs off on my top bumper trim trying to get it off and I was trying very hard to not do that. I was only able to torque 1 of 2 of the bolts that holds the assembly to the frame. Their was no way to get a torque wrench on the other. I was lucky to get it tightened. After it was finished though I can tell you that the end result is great. I really like the product and it seems very well made.
Bill M
Reviewed in the United States on June 29, 2019
The media could not be loaded.
Brandon
Reviewed in the United States on July 27, 2018
Amp Research makes solid products. After getting their power steps for the sides and loving them, I knew I would want the Bed Step. Especially in preparation before lifting my truck as I’m not the tallest person (5’ 9”) This Bed Step does not disappoint. Heavy duty. Easy to install. Functions as advertised. My 2017 Tundra Bed is much more easily accessible now that I have solid footing in/out.
Recommended Products

$674.48

$ 99 .00 $99.00

4.7
Select Option